კვამლის დეტექტორები

The AW-BK901 is an infrared linear reflex beam smoke detector. The device operates on the reflection principle: the emitter and receiver are combined into a single housing, while signal return is ensured by a reflector (mirror) installed on the opposite side. The system is equipped with an automatic calibration function, which allows for easy configuration of the device. For reliable operation, the detector features an automatic signal recovery capability, which eliminates false alarms. Features: - Manufacture in compliance with EN54-12 - Hassle-free alignment, built with a digital guide display and a laser beam pointing - Four ranges wide monitoring from 8-100 meters via encoder - Three users programming sensitivity adjustment - Built-in microprocessor - The self-diagnosis function can monitor for internal faults - Fire and fault-interfacing relays

The Fireray One is a beam smoke detector. The Fireray One is equipped with the One Minute Auto-Alignment™ feature, which ensures automatic alignment after positioning the laser onto the reflector and activating the system. It is equipped with Building Movement Tracking™ technology, which ensures the automatic correction of deviations caused by building movement and maintains precise beam alignment. Features: - Integrated user interface - Alignment mode switch, alignment direction buttons, and duration switches for alarm response threshold - Alignment status indicator - 2 green LEDs and 1 yellow LED - Green LED flashes every 10 seconds during stability - The red LED flashes every 10 seconds during a fault - Yellow LED flashes every 10 seconds for contamination or every 5 seconds for contamination

Fireray Long Range Kit 1010-000 is an accessory that increases the operating range of 6010-100 Fireray One from 50m to 120m.

The 400-003 is a high-sensitivity, non-addressable Carbon Monoxide (CO) detector designed for integration into fire detection and safety systems. The device utilizes an advanced semiconductor gas sensor, ensuring early detection of toxic gas and high immunity against false alarms. This model (400-003) is a 4-wire system detector equipped with a built-in sounder (siren) and a relay output, allowing for the control of auxiliary devices (e.g., ventilation, shut-off valves) during an alarm. Its compact and low-profile design easily fits into any interior Features: - Reliable Protection: Effectively detects dangerous concentrations of Carbon Monoxide (CO). - Universal Compatibility: Works with 4-wire non-addressable and addressable (via zone monitor module) systems. -Autonomous Functions: Features a built-in 85 dB sounder and a relay output (NO/NC). - Easy Operation: Requires no sensor calibration or replacement; features an Auto-reset function when gas levels decrease - Compliance with Standards: Certified according to UL 2075 and EN 50291 standards.

The XS01 is an autonomous smoke detector with a sleek and minimalist design, featuring high sensitivity (thanks to the latest photovoltaic technology), a 10-year battery life, and a loud alarm of over 85 dB. Features: - Certified by UL 217, EN 14604:2005 standard - High sensitivity - 10-year battery life - loud alarm over 85 dB - with flashing LED indicator - Test and mute button

The AW-D611 is a standalone smoke detector. The device does not require wiring and operates on a battery. The detector is equipped with a red LED indicator that provides visual signaling in all directions. In normal mode, the indicator flashes once every minute. When smoke is detected, both the sound signal and the LED light are activated. The device features a special test button that allows you to check the detector's operation or mute the sound signal during an alarm. Also, in case of a low battery, the system automatically emits a warning signal. Features: - Surface mounting - Loud sound warning - LED indicator - Wireless connection, easy to install - Automatic alarm when under low battery voltage - Complies with the latest EN-14604 standards

FIRETEXT2 is a certified stand-alone smoke and carbon dioxide alarm GSM detector that sends a message in the form of SMS. Features: - Integrated GSM module - Battery 9V lithium 1200 mAh ANSI/NEDA 1604LC - Test button - LED indicator

The SensoMAG BM120 is a reflective linear optical smoke detector that is compatible with both MAG series and other manufacturers' fire alarm control panels. The device is powered by an external 24VDC power source. Using the 4 reflective plates included in the package, the effective detection distance covers a range from 50 to 120 meters. The device features an automatic calibration function for the detection module , while precise alignment during the installation process is achieved using an integrated laser pointer. Configuration of the detector's sensitivity parameters is managed via DIP switches located on the main board. Features: - Detection distance: 50–120 meters - Coverage area (width): 15 meters (7.5 meters on each side) - Auto-calibration mode - Self-compensation algorithm

The SensoMAG BM60 is a reflective linear optical-smoke detector compatible with MAG series fire alarm panels, as well as third-party systems. The device operates on an external power source (24VDC). The detector comes with a single reflector, which ensures a smoke detection range of up to 60 meters. Its integrated laser pointer simplifies the installation and alignment process. Features: - Coverage area width — 15 meters (7.5 meters on each side) - Auto-calibration mode - Sensitivity adjustment via DIP-switches - Self-compensation algorithm

SensoIRIS BM60 is an addressable reflective linear optical-smoke detector compatible with IRIS4, IRIS8, and Simpo X addressable fire alarm control panels. The detector is powered directly from the loop, although it can also be connected to an external power source (24VDC) if needed. The device comes with a single reflector, which can detect smoke with a maximum range of up to 60 meters. The BM60 model integrates an automatic calibration function for the sensor mechanism, and it also features a built-in laser pointer for precise alignment. The sensitivity adjustment of the SensoIRIS BM60 is done directly from the fire alarm panel menu, rather than on the device itself. Features: - Detection range — 60 meters - Coverage area width — 15 meters (7.5 meters on each side) - Auto-calibration mode - Laser pointer for alignment

SensoIRIS BM120 is an addressable reflective linear optical-smoke detector compatible with IRIS4, IRIS8, and Simpo X addressable fire alarm panels. The detector is powered directly from the loop, although it can also be connected to an external power source (24VDC) if needed. The device comes with 4 reflective plates, which ensures smoke detection in the range of 50 to 120 meters. The BM120 model integrates an automatic calibration function for the sensor mechanism and features a built-in laser for precision and easy installation. Similar to the 60-meter version, the sensitivity adjustment of the SensoIRIS BM120 is done directly from the fire alarm panel menu. Features: - Detection range — 50 to 120 meters - Coverage area width — 15 meters (7.5 meters on each side) - Auto-calibration mode - Laser pointer for alignment

JTY-GS-T8001 is a reflective linear beam smoke detector. The device combines the transmitting and receiving parts into one housing and works in conjunction with a reflector. It features a built-in microprocessor that monitors smoke concentration in real-time and is connected to a compatible fire panel through a four-wire system. The beam detector is equipped with a laser module. The device features an automatic compensation function for dust pollution. Features: - Built-in laser module ensures quick location of the reflector position and easy alignment - Microcontroller processes data in real-time and controls environmental conditions - Features a self-diagnostic function to monitor internal faults - Equipped with LED indicators on the housing for easy control of signal strength

HZ911E is a linear optical beam smoke detector. It consists of two main parts: a detector and a reflector. In normal operation mode, the infrared beam emitted by the detector is reflected by the reflector and returns to the receiving tube. When a fire occurs, smoke blocks the infrared beam, resulting in a decrease in the received signal, and the system issues a fire alarm. During an alarm, the detector's red status indicator is constantly lit, and the alarm contact is closed. Features: - The device complies with the GB14003-2005 standard - The protection area is 7 meters on both sides of the beam

The A9036T is an addressable multisensor fire detector consisting of an optical smoke sensor and dual thermal (heat) sensors. It simultaneously combines the operating principles of both a photoelectric smoke detector and a heat detector. The device operates on a non-polarity two-wire bus. Features: - Features a low-profile design and a 360° red LED alarm indicator - Has a built-in microcontroller (MCU) for real-time data processing and analysis - Automatic compensation for temperature, humidity, and dust accumulation (drift compensation) along with fault diagnostics - Offers 5 different operating modes, which are configured via a programmer

T-ART/G2+ is a multi-user intercom G2+ two-way audio headset with touch buttons. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic - Duplex audio communication - Secret audio communication and door opening - Connection to the entrance door pushbutton, which saves the use of the doorbell - Different ringing tones depending on the place from where the call was made - Status LEDs: door open, do not disturb, switched on - Volume regulation - Output to auxiliary call repeater - Intercommunication with other units of the house

The A9020T is an addressable point-type heat detector designed to operate with the SEC3002 fire alarm control panel. It collects real-time ambient temperature data, transmits it to the control panel, and accurately executes control commands received from the panel. Features: - Features an automatic temperature compensation mode and a sensor fault detection function for fault reporting to the control panel - Designed with an upper and lower cover and installed on an independent base, making device installation and maintenance convenient - Equipped with a built-in remote indicator output terminal that activates an external indicator light during a fire alarm

The A9030T is an addressable smoke detector designed to operate with the SEC3002 fire alarm control panel. It determines smoke concentration in real-time, transmits the data to the control panel, and executes commands received from it. Features: - Features an automatic compensation function for temperature, humidity, and dust accumulation (drift compensation) along with sensor fault diagnostics - Designed with a two-part housing (upper and lower covers) and an independent mounting base, making device installation and expansion convenient - Equipped with a remote indicator output terminal that activates an external emergency light during an alarm - Provides full electronic coding and address rewriting directly on-site via a programmer

The A9060T is an addressable fire alarm manual call point that operates with intelligent two-wire control systems. When pressed after a fire is manually confirmed, the alarm signal and the device address are immediately transmitted to the control panel. Under normal conditions, its red indicator flashes, whereas in an alarm state, it remains continuously lit. Features: - Activated without breaking glass (reusable lever) and reset to its initial state using a special tool - Address configuration is performed electronically via the CODER-9001 programmer - Installed via surface or semi-flush mounting

The Soul/Access Surface Coded Panel is a multi-user G2+ two-way video call panel equipped with a backlit metal push buttons keypad and a 150º wide-angle camera. Its case is made of Zamak alloy, graphite color, and is anti-vandal. Features: - Made in Spain - Vandal-proof: IK-07 and IP-54 are weatherproof - 150º wide-angle camera with white auto-on LEDs for night vision - LEDs indicating the different states of the system - Backlit metal push buttons with serigraphy of numbers and characters - Secret communication of audio, video, and door-opening process - Acoustic confirmation tones when pressing buttons - Relay output for the activation of two doors - Includes rain shield - Management of up to 128 apartment addresses - External CCTV camera connection terminals - 40 access PIN codes - 8 temporary access PIN codes

- Fixation bracket for Soul/access panel. - Made of Zamak alloy, graphite color. - Allows mounting the SOUL/ACCESS panel without the use of the rain shield.

ART 1/G2+ is a multi-user intercom G2+ system Speakerphone with touch buttons. Features: - Made in Spain - Degree of protection (IP)30 - "G2+" digital installation - Casing manufactured in polished ABS white color - Capacitive touch buttons with acoustic confirmation on press - Duplex audio communication - Privacy on audio and door open progresses - Do not disturb function with light indication - Input for doorbell apartment push button - Different call reception tones depending on where the call is coming from - Volume adjustment - Output to auxiliary call repeater - Intercommunication with other monitors in the same apartment

C9069L is a two-wire remote indicator. It can be used with both addressable and conventional detectors. When the detector triggers an alarm, the remote indicator lights up. Features: - The device consists of a top and bottom cover - Works with a non-polarity, two-wire connection

ART 4 LITE/G2+ is a multi-user intercom "G2+" system monitor with a 4.3'' color screen and touch buttons. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic -Surface mounting - Hands-free monitor with a 4.3" color screen - 4.3" screen with capacitive navigation buttons - High-efficiency loudspeakers - Audio communications, video, and secret door opening - Video-spy functions, auto-start, doctor mode, and do not disturb - Intercommunication with other units of the house selectively - Personalization of ringtones - Connection to the entrance door pushbutton, which saves the use of the doorbell - Output to auxiliary call repeater - Up to 4 monitors in the same house without additional power

ART 7 Lite/G2+ is a multi-user intercom G2+ system monitor with a 7'' color screen. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic - Surface mounting - Hands-free monitor with a 7" color screen - 7" screen with capacitive navigation buttons - High efficiency loudspeakers. - Audio communications, video, and secret door opening. - Video-spy functions, auto-start, doctor mode and do not disturb. - Intercommunication with other units of the house selectively. - Personalization of ringtones. - Connection to the entrance door pushbutton, which saves the use of the doorbell. - Output to auxiliary call repeater. - Up to 4 monitors in the same house without additional power.