Natron WE-A is an addressable wireless gateway module designed for operation with iRIS8 and iRIS4 addressable fire alarm panels. Natron WE-A is powered directly by the loop line and can be controlled via the communication protocol. Up to 5 Natron WE-A wireless getaway modules can be connected to a single iRIS8/iRIS4 fire alarm control panel. Natron WE-A communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Each wireless device receives an own address in the panel configuration and can be managed independently. Natron WE-A is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. Features: - Standards applied: EN 54-18; EN 54-17; EN 54-25 - Built-in isolator module - Up to 5 wireless gateway to iRIS8/iRIS4 addressable panel - Up to 32 NATRON series wireless devices enrolled to a gateway module - 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

Natron WE-C is a wireless gateway module designed for operation with conventional fire alarm panels, including MAG series panel, produced by Teletek Electronics JSC. Natron WE-C is powered from external power supply with back-up battery. The module is equipped with special inputs for monitoring the main and back-up power supplies. Up to 5 Natron WE-C wireless getaway modules can be connected to a single conventional fire alarm control panel. Natron WE-C communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Natron WE-C is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. The programming of the wireless devices parameters is from the module menus. Features: - Standards applied: EN 54-18; EN 54-25 - Specially designed to work with any conventional fire alarm panel - Direct connection to conventional zone terminal - Compatible for operation with MAG series and third-party conventional fire alarm control panels - Up to 5 wireless gateways to conventional panel/building* - Up to 32** NATRON series wireless devices enrolled to a gateway module - Up to 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

Natron SD Wireless optical-smoke detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. The signal coverage of the Natron SD reaches up to 1500 (in open area), thanks to our bidirectional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with 2x CR123A type of batteries. The Natron SD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-7 and EN 54-25 certificated - Bi-directional wireless communications - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years

Natron MD Wireless combined detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron MD combines an optical-smoke and a thermal/heat detection parts. The signal coverage of the Natron MD reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with 3x CR123A type of batteries. The Natron MD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-5; EN54-7 and EN 54-25 certificated - Bi-directional wireless communications - Combined – Smoke and Heat detector - Thermal part type – Rate-of-rise - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years Bi-directional wireless communications Combined – Smoke and Heat detector Thermal part type – Rate-of-rise LEDs indication for 360° visibility Built-in 80db buzzer Tamper switch Sensitivity adjustment Signal coverage test Protection – IP30 Coverage range – 1500 m open area Long battery life – up to 10 years EN 54-5; EN54-7 and EN 54-25 certificated

Wireless heat detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron TD supports two heat detection methods – fixed temperature and rate-of-rise types. The signal coverage of the Natron TD reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with a single CR123A type of battery. The Natron TD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-5 and EN 54-25 certificated - Bi-directional wireless communications - Selectable Heat detection type – Fixed or Rate-of-rise - Thermal class – A1R, A2S and BS - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years

Natron MCP Wireless manual call point, compatible with both – Natron WE-A and Natron WE-C wireless gateways. The signal coverage of the Natron MCP reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with a single CR123A type of battery. Features: - EN 54-11 and EN 54-25 certificated - Type of the working element – Resettable (flexible) - Type A - Tamper switch - Optional protective plastic cover - Rate of protection IP40 - Coverage range – 1500 m open area - Signal coverage test - Long battery life – up to 10 years

Wireless gateway modules for integration of Natron wireless devices to iRIS addressable fire series of Wireless wall sounder and strobe, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron WSS supports 32 different sound types, selectable from the iRIS panels, as well as two sound levels – high and low. The signal coverage of the Natron WSS reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 8 years, with 4x CR123A type of batteries. Features: - EN 54-3; EN 54-23; EN 54-25 certificated - Bi-directional wireless communications - Selectable sound level – LOW (80-86dB)* and HIGH (92-97dB) - 32 sound types selectable from the panel - Piezo sounder and white flash - Tamper switch - Signal coverage test - Protection – IP31 - Coverage range – 1500 m open area - Long battery life – up to 8 years