Additional modules

The proxiDimmer v2 is an "invisible" controller that allows you to turn on and adjust LED lighting and its brightness (dimming) by approaching your hand, without physical contact. The device is mounted on the inner side of a non-conductive surface, making it hidden within the interior. The device automatically calibrates according to the material and is ready for operation within a few seconds after switching on. Features: - It is installed under the surface using double-sided adhesive tape, which does not damage the furniture's appearance. - Switching on/off is done by briefly approaching the hand (approx. 1.5 sec), while brightness is adjusted by holding the hand near the controller. - It detects hand proximity from a distance of up to 3 cm in materials such as wood, plexiglass, and chipboard. - It operates on 12-24V voltage and withstands a load of up to 5A (up to 120W power). - The system optimizes the sensor automatically at each power-on for the best sensitivity.

The lightBox v4 is a Bluetooth controller designed to manage LED lighting (RGB, RGBW, or monochromatic strips). The device operates via the BleBox smart world application and allows you to control colors, brightness, and lighting effects. Its compact design enables installation in a flush-mounted box, furniture, or directly within the lamp housing. Features: - It is possible to control one RGBW strip, one RGB strip with an additional white channel, or four independent single-color (monochromatic) LED strips. - An energy-efficient connection that does not require a Wi-Fi router. - Predefined colors and dynamic effects are available within the application. - Brightness adjustment (dimming) and color selection are performed via an intuitive "color wheel". - The device features protection against inverted polarization and electrostatic discharge (ESD).

The proxiSwitch v2 is an "invisible" controller that allows you to manage lighting and other electrical devices (12-24V) by hand movement, without physical contact. The device is mounted on the inner side of a surface, making it completely hidden within the interior. The device automatically calibrates on any non-conductive surface. Features: - It is installed under the surface using double-sided adhesive tape. - It detects hand proximity from a distance of up to 3 cm (depending on the material). - It supports bistable (regular switch), memory-enabled, and monostable (button-type) modes. - It operates on 12-24V voltage and withstands a load of up to 5A. - The system performs sensor optimization automatically at startup and every 15 seconds.

The ampBox is a four-channel amplifier designed to expand LED lighting systems (RGB, RGBW, CCT, or monochromatic strips). The device allows you to manage lighting through a single controller without power loss or signal delay. ampBox is equipped with optical isolation and digital signal correction. Features: - Supports a total power of up to 480W (20A). - Works with BleBox controllers such as wLightBox, wLightBoxS, or lightBox. - Provides full galvanic separation between input and output circuits for safety. - Possible to connect RGBW, RGB, CCT (warm/cold white), or four independent single-color LED strips. - The built-in system corrects the PWM signal for the ideal visual effect.

The reflectiveSwitch photoelectric sensor is a compact reflective controller designed to automatically manage LED lighting upon detecting an object. Its small dimensions allow it to be placed directly within an LED profile. The device operates on the principle of an optical sensor: it reacts to approach or separation. Additionally, the controller features three different operating modes. Features: - It is ideal for cabinets—the light turns on when the door opens and turns off when it closes (NC mode). - When operating in bistable mode, it allows you to turn the light on/off with a single hand proximity. - It comes with adhesive tape for stable mounting. - It operates on 12-24V voltage and withstands a load of up to 5A

The reflectiveSwitch is a reflective controller designed for the automatic management of LED lighting based on object detection. Its small dimensions allow it to be placed directly within an LED profile. The device operates on the principle of an optical sensor: it reacts to the approach or separation of an obstacle (for example, a cabinet door). The controller has three different operating modes. Features: - It is ideal for cabinets—the light turns on when the door opens and turns off when it closes (NC mode). - When operating in bistable mode, it allows you to turn the light on/off with a single hand gesture. - It comes with adhesive tape for stable mounting. - It operates on 12-24V voltage and withstands a load of up to 5A.

The twilightCompact is a compact twilight switch (photo-relay) designed for the automatic management of LED lighting based on the ambient light level. Its small dimensions allow the device to be installed in the housing of other devices, in installation boxes, or directly in an LED profile. The device operates on the principle of an optical sensor: it automatically turns on the lighting at dusk and turns it off at dawn. twilightCompact is equipped with an automatic calibration function. Features: - Dimensions are only 23 x 17 x 22 mm, making it one of the smallest photo-relays on the market. - The light sensor independently decides when to turn the lighting on/off, which saves energy. - Screw terminals provide a fast and reliable connection for wires. - It operates on 12-24V DC voltage and withstands a load of up to 5A. - The housing is made of a self-extinguishing polyurethane composition, which increases fire safety.

The twilightCompact is a compact twilight switch (photo-relay) designed for the automatic management of LED lighting based on the ambient light level. Its small dimensions allow the device to be installed in the housing of other devices, in installation boxes, or directly in an LED profile. The device operates on the principle of an optical sensor: it automatically turns on the lighting at dusk and turns it off at dawn. twilightCompact is equipped with an automatic calibration function. Features: - The light sensor independently decides when to turn the lighting on/off, which saves energy. - Screw terminals provide a fast and reliable connection for wires. - It operates on 12-24V DC voltage and withstands a load of up to 5A (up to 120W power). - The housing is made of a self-extinguishing polyurethane composition, which increases fire safety