SensoIRIS S130 is аn addressable optical-smoke detector designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 is compatible with firebase B124 Features: - Sensitivity adjustment from the panel - Thin and simple design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoMAG MCP150 is a fire alarm button with a built-in isolator module. The button is intended for addressable fire systems operating on the TTE protocol. The alarm button is activated by a finger press and sends a signal to the control panel to trigger an alarm for further response. Features: - Certified by EN54-11, EN54-17 and LPCB standard - Surface mounting - Reloadable construction - LED indicator - Includes a tool to reset the button - it is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - IP40 protection - Built-in isolator module

SensoIRIS B124 is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Low profile design - Reliable contact system - Possibility of locking the detector to the base - BOSEC certified

SensoIRIS M140 is an addressable combined (temperature and smoke) detector designed for early fire detection. The detector works with panels that support the TTE communication protocol. The detector is compatible with the fire base B124. Features: - Certified by EN54-5, EN54-7 and EN54-17 standard - sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS T110 is an addressable temperature detector designed to detect fire situations at an early stage. The detector works with panels that support the TTE communication protocol. Detector SensoIRIS T110 is compatible with fire base B124 Features: - Certified by EN54-5 standard - Can work in both fixed temperature and temperature rise detection mode - Choose a class from the panel - A1R, A2S, BS - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS WSB IP65 is a waterproof protected deep base specially designed for outdoor installations of addressable sounders SensoIRIS series. The deep base is suitable for wall mounting in applications in aggressive environments requiring IP65 protection of the devices. SensoIRIS B124 standard base is mounted with screws. Features: - Certified by EN 60529 standard - Protection IP65 - Surface mounting - wire max. Cross section 3 mm - Compatible with SensoIRIS series directional sirens

SensoIRIS S130 IS is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS GAS is an addressable gas, LPG and CH4 (methane) leak detector. The gas detector has an automatic diagnostic function, it constantly checks the status of the sensor and electronics. SensoIRIS GAS is equipped with a button with the following functions: - Short press activates "SILENCING" mode, green LED flashes, buzzer and panel activation are disabled for 5 minutes. - If pressed for longer than 5 seconds, the "TEST" mode is activated, in this case the green, red and yellow LEDs are activated. The panel and buzzer are also activated. After 6 seconds, the gas detector emits 2 short beeps and turns off the "TEST" mode.

The addressable manual call point is designed for application in addressable fire alarm systems, which support TTE communication protocol. The call point has a built-in isolator module which when used allows continuous operation of the loop in case of a short circuit and without the need of using additional isolator modules. The call point is powered on from the fire panel and can be controlled via the communication protocol. Features: - Working element (2 parts) - Frangible element – non-resettable (a broken glass) - Operating element – resettable (a button) - Call point type (method of operation according to EN 54-11) – B - Built-in isolator module - EN54-11 and EN54-17 certified

SensoIRIS T110 IS is аn addressable heat detector with built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. Features: - Can work as a fixed temperature or rate of rise detector - Class, selectable from the control panel – A1/R, A2/S, B/S - Low profile design - LED indication with 360° visibility - Built-in isolator - EN54-5 and EN54-17 certified

The SensoIRIS M140 IS an addressable combined (temperature and smoke) detector with a built-in isolator that can be placed to detect fires at an early stage. The detector works with panels that support the TTE communication protocol. The detector is compatible with the firebase B124 Available in two colors: white and black Features: - Sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication - Built-in isolator - EN54-5, EN54-7 and EN54-17 certified

SensoIRIS S130 IS Black is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. Features: - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS B124 Black is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Color Black - Low-profile design - Reliable contact system - Possibility of locking the detector to the base

SensoIRIS MCP150 IP67 is a waterproof addressable manual call point designed for outdoor installations and IP67 environments, with a built-in isolator module. The call point is equipped also with a protective transparent cover for avoiding fault or accidental activation. SensoIRIS MCP150 IP67 is powered on from the fire panel and can be controlled via the communication protocol. Features: - Built-in isolator module - Surface mounting - Type (according to EN54-11) – A - LED indication - Special test tool for resetting after alarm event - Protective plastic cover - IP67 according EN 60529