Addressable

A9058T is an addressable I/O (input/output) module used with loop-type fire alarm control panels. It is powered directly by a non-polar 2-wire loop, features low power consumption, and does not require an external 24V power supply connection. The module is installed directly on the DZ-9058 base. Features: - The output contact is a dry contact, without monitoring - The module has 3 programmable working modes: normally open (NO) input signal, normally closed (NC) input signal, and equipment fire alarm and fault input signal (Mode 3) - The address is assigned electronically via a programmer (CODER), with an address range from 1 to 324 - Equipped with status indicators (LEDs) that reflect the status of the input (INPUT ON) and output (OUTPUT ON) signals

A9057T is a loop isolator primarily used to isolate a short-circuited section on the network. After the short circuit problem is resolved, the isolator automatically restores the isolated section and returns it to the overall system. Features: - Isolates the faulty part of the loop in the event of a short circuit - Equipped with a yellow LED status indicator that flashes during polling and illuminates steadily upon activation

DZ-9057 is an ivory mounting base. It is made of ABS material. The DZ-9057 mounting base fits and is used directly with the A9057T model. Features: - Compatible and used with the A9057T model - Made of durable and high-quality ABS plastic

CODER-F100E is a programmer for reading and writing addressable devices (detectors, modules, sounder beacons). It is used for the installation and maintenance of automatic fire alarm systems. The device is used to assign addresses, change working modes, count devices connected to the network, and perform testing. Features: - Can address more than 50,000 points when fully charged - Battery over-discharge protection and automatic shutdown function - Output short circuit protection

HZ911E is a linear optical beam smoke detector. It consists of two main parts: a detector and a reflector. In normal operation mode, the infrared beam emitted by the detector is reflected by the reflector and returns to the receiving tube. When a fire occurs, smoke blocks the infrared beam, resulting in a decrease in the received signal, and the system issues a fire alarm. During an alarm, the detector's red status indicator is constantly lit, and the alarm contact is closed. Features: - The device complies with the GB14003-2005 standard - The protection area is 7 meters on both sides of the beam

C9069L is a two-wire remote indicator. It can be used with both addressable and conventional detectors. When the detector triggers an alarm, the remote indicator lights up. Features: - The device consists of a top and bottom cover - Works with a non-polarity, two-wire connection

SEC3002-2 is a fire alarm panel designed to monitor input signals, provide indications, and activate programmable outputs. It complies with the EN54-2 standard. The system supports 324 addresses on 1 loop, and in the case of 2 loops — 510 addresses. The panel is equipped with a 4.3-inch color LCD screen (with a 480x272 resolution) and a 32-zone indication panel. Features: - Supports 324 addresses for 1 loop or 510 addresses for 2 loops - Equipped with a 4.3-inch color LCD screen (resolution: 480x272) - Features a 32-zone indication and control panel - Stores up to 1000 historical events with date and time stamps

JTY-GS-T8001 is a reflective linear beam smoke detector. The device combines the transmitting and receiving parts into one housing and works in conjunction with a reflector. It features a built-in microprocessor that monitors smoke concentration in real-time and is connected to a compatible fire panel through a four-wire system. The beam detector is equipped with a laser module. The device features an automatic compensation function for dust pollution. Features: - Built-in laser module ensures quick location of the reflector position and easy alignment - Microcontroller processes data in real-time and controls environmental conditions - Features a self-diagnostic function to monitor internal faults - Equipped with LED indicators on the housing for easy control of signal strength