Series Simon 15 universal dimmer switch 230V, 5-215W. Color - Graphite. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Mechanism type: dimer - Material: thermoplastic - Color: Graphite - Security IP: 20 - Certificate: EAC declaration Recommendations: it is not allowed to install two dimmers in one circuit

MARINE Digital MEET PANEL SURFACE BOX

MILO 1W PANEL SURFACE BOX MEET

The set consists of: - K4 control panel with 4 zones - KLCD LIGHT Plus keyboard - With a transformer - With a box The K Series / KSeries V is the security control panel for building protection. EN 50131, Grade 2, Class 2 approved. The control panels are equipped with 4 zones, expandable to 16. KSeries / KSeries V is able to notify one or more situations of ALARM, ROBBERY, TAMPERING, and TROUBLE with different carriers: Optional- GPRS/3G/4G module: voice beep calls, SMS messages. Backlight liquid crystal display 32 characters on two lines - 3 signaling LEDs. Protective front door. Programmable keys for quick commands. Dimensions: W 86, H 114, D 23 mm

CDM-003 connector 12V, with wire

HF4 is a waterproof standalone fingerprint access controller with touch keypad and metal case. Features: - Capacitive Fingerprint Sensor, touch keypad - One relay,1000 users (988 common users + 2 panic users +10 visitor users) - Card Type:125KHz EM Card/13.56Mhz Mifare Card - Wiegand 26~44bits,56bits,58 bits input & output - Can be used as Wiegand reader with LED & buzzer output - User data can be transferred (except fingerprint users) - Integrated alarm & Buzzer output - Built-in light dependent resistor(LDR) for anti-tamper - Backlit keypad, can set automatic OFF after 20 seconds - 2 devices can be interlocked for 2 doors - Bluetooth function or Big user capacitive for optional

EWS3 is a wireless indoor device (4xAA) with built-in siren speakers and LED indicators operating with ELDES wireless alarm systems. The simply shaped EWS3 device has it all: built-in siren speakers and LED indicators operating with ELDES wireless alarm systems to ensure security. The device is designed to notify the user by audio and visual signals in the event of alarm as well as in event of system arming/disarming. Two tamper switches prevent the enclosure from attempting to open or detach the device.

IRIS TTE loop is a loop expander for 1 loop in IRIS 8 Addressable Fire Alarm Systems. The loop expander supports TTE communication protocol and is designed to operate with SensoIRIS detectors, modules, and sirens. Feature: - Communication Protocol: TTE (Teletek Electronics) - Maximum number of devices: up to 250 - Maximum consumption of the loop devices: 0.5A

The DL-E-06-130/T-EN54 is a 6W suspended ceiling speaker equipped with a 130mm full-range driver, a 100V transformer and 3 power modes. Features: - Certified by EN 54-24 standard - IP21C protection - 3 power modes

TTE LAN is a universal transmission module for alarms and other events. It can be used as a fire and security alarm panel, and as a separate condition, independent separately. TTE LAN module, SIMPO and ECLIPSE panels with safety serial communication method, and panels of other manufacturers - with 6 replacement/output terminals (I/O 1 - I/O 6). TTE can also be used for remote control and monitoring of various devices. Features: - It has an indication of the connection to the network and the panel - It can be programmed remotely with AJAX SP PRO/MobileTTE (iOS/Android) applications - Micro USB port, software to connect to ProsTE - Serial communication method with SIMPO and ECLIPSE panels - 6 programming inputs/outputs, collector type (100mA each) - Ability to write network settings manually

The WA 06-165/T-EN54 is a 6W wall-mounted speaker featuring a 100-volt transformer and 3 power modes. Features: - Certified by EN 54-24 standard - Complies with British Standard BS 5839, Part 8 - IP54 protection - Durable MDF wooden body - 3 power modes

The DL-A-10-165/T-EN54 is a 10W in-ceiling speaker featuring a 165mm full range driver, 100V transformer and 4 power modes. Features: - Certified by EN 54-24 standard - Complies with British Standard BS 5839, Part 8 - IP21C protection - Durable ABS body - 4 power modes

The loop tester is a diagnostic device for cable test prior to detectors installation, for loop continuity test after devices installation, and for auto-addressing. Features: - Power supply from 220 V AC grid and Adaptor included - For cable test until detectors and sirens are still not mounted - Loop or Line tests available - Total loop test report or single test available - Loop Short/Loop Break localization for both Addressed and Unaddressed loop - Branch detection with report for number of devices and begin/end point - All Methods of Addressing available. - Easy navigation with 4 buttons only and turn ON/OFF switch

The DA-P 20-130/T-EN54 is a 20W corridor speaker featuring a 130mm full-range driver, 100V transformer and 4 power modes. Features: - Certified by EN 54-24 standard - Complies with British Standard BS 5839, Part 8 - IP66 protection - Durable ABS body - PG11 connector - 4 power modes

The DK 15/T-EN54 is a 15W power speaker for outdoor use, equipped with a 100V transformer and 4 power adjustments, also low-impedance operation (20 ohms) is possible. Features: - Certified by EN 54-24 standard - Certified by BS 5839, Part 8 British Standard - IP66 protection - The impact-resistant ABS housing UL94V0 in RAL 7035 - PG11 connector - 4 power adjustments

EM CARD magnetic card

The XS01 is an autonomous smoke detector with a sleek and minimalist design, featuring high sensitivity (thanks to the latest photovoltaic technology), a 10-year battery life, and a loud alarm of over 85 dB. Features: - Certified by UL 217, EN 14604:2005 standard - High sensitivity - 10-year battery life - loud alarm over 85 dB - with flashing LED indicator - Test and mute button

Natron WE-A is an addressable wireless gateway module designed for operation with iRIS8 and iRIS4 addressable fire alarm panels. Natron WE-A is powered directly by the loop line and can be controlled via the communication protocol. Up to 5 Natron WE-A wireless getaway modules can be connected to a single iRIS8/iRIS4 fire alarm control panel. Natron WE-A communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Each wireless device receives an own address in the panel configuration and can be managed independently. Natron WE-A is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. Features: - Standards applied: EN 54-18; EN 54-17; EN 54-25 - Built-in isolator module - Up to 5 wireless gateway to iRIS8/iRIS4 addressable panel - Up to 32 NATRON series wireless devices enrolled to a gateway module - 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

Series Simon 15 double switch with lighting. Color - Champagne. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Type of device: double switch with lighting - Material: thermoplastic - Color: Champagne - Security IP: 20 - Certificate: EAC declaration

Natron WE-C is a wireless gateway module designed for operation with conventional fire alarm panels, including MAG series panel, produced by Teletek Electronics JSC. Natron WE-C is powered from external power supply with back-up battery. The module is equipped with special inputs for monitoring the main and back-up power supplies. Up to 5 Natron WE-C wireless getaway modules can be connected to a single conventional fire alarm control panel. Natron WE-C communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Natron WE-C is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. The programming of the wireless devices parameters is from the module menus. Features: - Standards applied: EN 54-18; EN 54-25 - Specially designed to work with any conventional fire alarm panel - Direct connection to conventional zone terminal - Compatible for operation with MAG series and third-party conventional fire alarm control panels - Up to 5 wireless gateways to conventional panel/building* - Up to 32** NATRON series wireless devices enrolled to a gateway module - Up to 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

TF-64G-T-L Memory card Micro SD 64GB