Series Simon 15 Call button with a light. Color - Graphite. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Mechanism type: Call button - Material: thermoplastic - Color: Graphite - Security IP: 20 - Certificate: EAC declaration

Series Simon 15 Call button with a pictogram. Color - Graphite. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Mechanism type: Call button - Material: thermoplastic - Color: Graphite - Security IP: 20 - Certificate: EAC declaration

Series Simon 15 double rosette with grounding, protective latches. Color - Graphite. Features: - Series: Simon 15 - Type of device: double rosette with grounding - Type of mechanism: electric socket - Material: thermoplastic - Color: Graphite - Security IP: 20 - Certificate: EAC declaration

Access point, wall-mounted WI-AP415, which is characterized by fast roaming, which means that the connection from one access point to another access point is transferred automatically and quickly. A standard PoE power supply is used and does not require an external power supply. Features: - 2 x 10/100 Mbps Ethernet ports - Fast roaming technology support - Support for AP controller and Cloud management

The SEC1000 is an addressable fire alarm control panel designed to provide constant monitoring of input signals, appropriate fire indication, and automatic activation of pre-programmed outputs. The device complies with EN 54-2 and EN 54-4 international standards. The panel features 1 operational loop that accommodates up to 120 addressable points (devices) and offers system expansion capabilities. Features: - Equipped with 1 operational loop that accommodates both Class A and Class B wiring types (the LOOP IN terminal is not used during Class B connection) - The built-in Power Supply Equipment (P.S.E) includes the PMC_01 power management control board and a Meanwell (LRS-75-24) power supply, providing constant monitoring of the mains and backup battery states - Features 16 fire zone LED indicators on the front panel for rapid visual identification

The SEC3002 is an addressable fire alarm control panel designed to monitor input signals, provide appropriate indications, and activate pre-programmed outputs. The device fully complies with EN 54-2 and EN 54-4 international standards. The panel features 1 main loop that accommodates up to 324 addressable devices and offers system expansion capabilities. Features: - Equipped with 1 operational loop (Class A type) that supports the connection of up to 324 addressable devices - Features a robust metal housing with a detachable exterior door, an operational front panel, an LCD display, and a printer integration zone - The built-in Power Supply Equipment (P.S.E) and PSE filter protect the system from momentary voltage fluctuations and automatically monitor both the mains network and backup batteries - Through an optional communication board, up to 20 panels can be networked together via a CAN bus, or up to 30 FIPs (Fire Indicating Panels) can be connected using the RS-485 protocol

Access point, wall-mounted WI-AP415, is characterized by fast roaming, which means that the connection from one access point to another access point is transferred automatically and quickly. A standard PoE power supply is used and does not require an external power supply. Features: - 2 x 10/100 Mbps Ethernet ports - 300 Mbps 2.4 GHz + 450 Mbps 5 GHz - Fast roaming technology support - Support Fit/Fat/Repeater/WISP modes - Support for AP controller and Cloud management - Each frequency band supports 8 SSIDs

The A9030T is an addressable smoke detector designed to operate with the SEC3002 fire alarm control panel. It determines smoke concentration in real-time, transmits the data to the control panel, and executes commands received from it. Features: - Features an automatic compensation function for temperature, humidity, and dust accumulation (drift compensation) along with sensor fault diagnostics - Designed with a two-part housing (upper and lower covers) and an independent mounting base, making device installation and expansion convenient - Equipped with a remote indicator output terminal that activates an external emergency light during an alarm - Provides full electronic coding and address rewriting directly on-site via a programmer

The A9020T is an addressable point-type heat detector designed to operate with the SEC3002 fire alarm control panel. It collects real-time ambient temperature data, transmits it to the control panel, and accurately executes control commands received from the panel. Features: - Features an automatic temperature compensation mode and a sensor fault detection function for fault reporting to the control panel - Designed with an upper and lower cover and installed on an independent base, making device installation and maintenance convenient - Equipped with a built-in remote indicator output terminal that activates an external indicator light during a fire alarm

Simon 15 series Internet socket single RJ-45 (AMP). Color - White. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Mechanism Type: RJ45 socket - Connector type: RJ45 - Material: thermoplastic - Color: White - Number of contacts: 1 - Security IP: 20 - Certificate: EAC declaration

The A9036T is an addressable multisensor fire detector consisting of an optical smoke sensor and dual thermal (heat) sensors. It simultaneously combines the operating principles of both a photoelectric smoke detector and a heat detector. The device operates on a non-polarity two-wire bus. Features: - Features a low-profile design and a 360° red LED alarm indicator - Has a built-in microcontroller (MCU) for real-time data processing and analysis - Automatic compensation for temperature, humidity, and dust accumulation (drift compensation) along with fault diagnostics - Offers 5 different operating modes, which are configured via a programmer

The DZ-912 is a low-profile mounting base designed for fire detection devices. It provides a stable platform for terminal connections while maintaining a discrete aesthetic. Features: - Applicable to A9030T, A9020T, A9036T, C9030T, and C9021T devices - Features a slim, compact, and low-profile design

The D9057B is an isolator base used to protect the fire alarm system from short-circuit faults. When a short circuit occurs on the loop, the base responds quickly and automatically isolates the damaged section. Once the fault is cleared, the base automatically exits isolation mode and reconnects the previously disconnected part back into the system. The device does not require coding and does not occupy an address in the system loop. Features: - Operates without occupying an address and takes up no space in the system loop - Can be used for an individual device (point isolation) as well as for a group of devices (area isolation) - Equipped with a yellow LED indicator that remains constantly lit during active isolation and turns off during normal operation

Series Simon 15 universal dimmer switch 230V, 5-215W. Color - Graphite. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Mechanism type: dimer - Material: thermoplastic - Color: Graphite - Security IP: 20 - Certificate: EAC declaration Recommendations: it is not allowed to install two dimmers in one circuit

The A9060T is an addressable fire alarm manual call point that operates with intelligent two-wire control systems. When pressed after a fire is manually confirmed, the alarm signal and the device address are immediately transmitted to the control panel. Under normal conditions, its red indicator flashes, whereas in an alarm state, it remains continuously lit. Features: - Activated without breaking glass (reusable lever) and reset to its initial state using a special tool - Address configuration is performed electronically via the CODER-9001 programmer - Installed via surface or semi-flush mounting

ZJ-9060 is a specialized mounting base engineered for industrial fire alarm modules. It is made of ABS plastic. Features: - Applicable to and used with the A9060T module - Structurally easy to assemble and install

A9092T is an addressable sounder beacon; it can be used with an addressable fire alarm control panel and is activated when connected to a signal loop. After receiving an alarm signal or command from the panel, the device emits a high-output audible and optical alarm signal to provide evacuation warning. Features: - Equipped with highly efficient LED technology and a specially designed lens - Features a tamper-proof screw hole for protection against unauthorized disassembly - Compatible with both wall and ceiling mount applications - Address configuration is done electronically via a special programmer

DZ-9091K is a red mounting base specifically designed for C9091T and A9092T series sounder strobes (audible and visual alarm devices). It is made of durable ABS plastic. Features: - Compatible and used with C9091T and A9092T sounder strobes - Features a compact, low-profile design

A9093T is an addressable sounder beacon (strobe-siren) that is compatible with addressable fire alarm control panels and is activated when connected to a signal loop. The primary function of the device is to generate audio and optical warning signals in the alarm zone. Features: - It has 7 different tone modes - Simultaneous or independent activation of the sound and light alarm is possible - It has a tamper-evident protection function

A9058T is an addressable I/O (input/output) module used with loop-type fire alarm control panels. It is powered directly by a non-polar 2-wire loop, features low power consumption, and does not require an external 24V power supply connection. The module is installed directly on the DZ-9058 base. Features: - The output contact is a dry contact, without monitoring - The module has 3 programmable working modes: normally open (NO) input signal, normally closed (NC) input signal, and equipment fire alarm and fault input signal (Mode 3) - The address is assigned electronically via a programmer (CODER), with an address range from 1 to 324 - Equipped with status indicators (LEDs) that reflect the status of the input (INPUT ON) and output (OUTPUT ON) signals

DZ-9058 is a specialized mounting base engineered for fire alarm devices. It is made of durable ABS plastic. Features: - Applicable to and used with the A9058T module