Access point, in-wall mounting WI-AP415

Code - 882847

Brand - Wi-Tek

Description

Access point, wall-mounted WI-AP415, is characterized by fast roaming, which means that the connection from one access point to another access point is transferred automatically and quickly. A standard PoE power supply is used and does not require an external power supply.

Features:
- 2 x 10/100 Mbps Ethernet ports
- 300 Mbps 2.4 GHz + 450 Mbps 5 GHz
- Fast roaming technology support
- Support Fit/Fat/Repeater/WISP modes
- Support for AP controller and Cloud management
- Each frequency band supports 8 SSIDs

Description / Specification

Downloads

Power Supply	802.3af PoE Supported
Power Consumption	< 6W
Wireless Standards	802.11ac wave1 802.11n/b/g/a
Operating Bands	2.4GHz & 5GHz
Antenna	2.4Ghz:2dBi, 5GHz: 2dBi
Spatial Streams	2.4GHz: 2x2 MIMO 5GHz: 1x1 MIMO
Signal Rate	Up to 300Mbps at 2.4GHz Up to 450Mbps at 5GHz
Receiver Sensitivity	2.4GHz: 802.11b: -85dBm@11Mbps / -94dBm@1Mbps 802.11g: -72dBm@54Mbps / -90dBm@6Mbps 802.11n Ht20: -70dBm@MCS7 / -88dBm@MCS0 802.11n Ht40: -68dBmMCS7 / -86dBm@MCS0 5GHz: 802.11a: -74dBm@54Mbps / -90dBm@6Mbps 802.11n HT20: -72dBm@MCS7 / -88dBm@MCS0 802.11n HT40: -68dBm@MCS7 / -85dBm@MCS0 802.11ac HT80: -58dBm@MCS9 / -80dBm@MCS0
Maximum Transmit Power	<20dbm
Interface	(2)10/100M Base-T Ethernet ports
Installation	Wall Mounting
External buttons	reset button (long press for 8 seconds to restore the factory default configuration)
Operating Temperature	-20℃~55℃
Storage Temperature	-40℃~70℃
Operating Humidity	5%~95% (non-condensing)
Storage Humidity	5%~95% (non-condensing)
Dimensions	86mm * 86mm * 35mm

WI-AP415_Datasheet_V2.pdf

Download

WiTek-WI-AP415-Firmware.rar