POE switch 4+1 outdoor WI-PS205-O, which is waterproof IP65 and used in outdoor space. With CCTV mode support, all PoE ports can transmit power and data up to 250 meters. Features: - 4 10/100Mbps RJ45 PoE Ports - 1 10/100Mbps Ethernet Port - Support CCTV mode: 250m PoE + VLAN - IP65 weatherproof enclosure - 6kV PoE surge protection - Working temperare:-30～70℃ - All-in-one for easy installation

Long distance WiFi pair WI-CPE111-KIT V2, which transmits network signals wirelessly up to 2km in open space, is used for e.g. elevators, industrial wireless solutions and other long distance wireless network signal transmission. Features: - Adjustable transmission power from 0 to 20dBm - Integrated 8dBi 2x2 dual polarized directional MIMO antenna - Open frequency support 2412-2484 MHz - Long distance wireless transmission up to 2 km - Wireless B/G/N speed up to 300 Mbps - Antenna angle 60° - Repeater/Basic Station/CPE/WISP operating modes - Centralized management system – Wi-Tek Cloud Platform - 24V passive PoE adapter included

The access point, ceiling mounted WI-AP217-Lite, suitable for indoor large area Wi-Fi coverage, is powered by 802.3af PoE power supply or 12V DC power supply. Features: - 2 x Gigabit Ethernet ports - 300Mbps at 2.4GHz + 867Mbps at 5GHz - Fast roaming technology support - Fit/Fat modes support - Support for AP controller and Cloud management

Access point, wall-mounted WI-AP415, which is characterized by fast roaming, which means that the connection from one access point to another access point is transferred automatically and quickly. A standard PoE power supply is used and does not require an external power supply. Features: - 2 x 10/100 Mbps Ethernet ports - Fast roaming technology support - Support for AP controller and Cloud management

Access point, ceiling WI-AP210-Lite, located for Wi-Fi coverage of an area that covers more than 20 meters. Powered by 802.3af PoE recipe source or 12V DC block. Features: - 2 x 10/100 Mbps Ethernet ports - 300 Mbps 2.4 GHz - Fast roaming technology support - Fit/Fat modes support - Support for AP controller and Cloud management

Access point, ceiling mounting WI-AP215, suitable for indoor large area Wi-Fi coverage, is powered by 802.3af PoE power supply or 12V DC power supply. Features: - 2 x 10/100 Mbps Ethernet ports - 300 Mbps 2.4 GHz + 450 Mbps 5 GHz - Fast roaming technology support - Support Fit/Fat/Repeater/WISP modes - Support for AP controller and Cloud management

Access point, wall-mounted WI-AP415, is characterized by fast roaming, which means that the connection from one access point to another access point is transferred automatically and quickly. A standard PoE power supply is used and does not require an external power supply. Features: - 2 x 10/100 Mbps Ethernet ports - 300 Mbps 2.4 GHz + 450 Mbps 5 GHz - Fast roaming technology support - Support Fit/Fat/Repeater/WISP modes - Support for AP controller and Cloud management - Each frequency band supports 8 SSIDs

The DL-E-06-130/T-EN54 is a 6W suspended ceiling speaker equipped with a 130mm full-range driver, a 100V transformer and 3 power modes. Features: - Certified by EN 54-24 standard - IP21C protection - 3 power modes

The WA 06-165/T-EN54 is a 6W wall-mounted speaker featuring a 100-volt transformer and 3 power modes. Features: - Certified by EN 54-24 standard - Complies with British Standard BS 5839, Part 8 - IP54 protection - Durable MDF wooden body - 3 power modes

The DL-A-10-165/T-EN54 is a 10W in-ceiling speaker featuring a 165mm full range driver, 100V transformer and 4 power modes. Features: - Certified by EN 54-24 standard - Complies with British Standard BS 5839, Part 8 - IP21C protection - Durable ABS body - 4 power modes

The DA-P 20-130/T-EN54 is a 20W corridor speaker featuring a 130mm full-range driver, 100V transformer and 4 power modes. Features: - Certified by EN 54-24 standard - Complies with British Standard BS 5839, Part 8 - IP66 protection - Durable ABS body - PG11 connector - 4 power modes

The DK 15/T-EN54 is a 15W power speaker for outdoor use, equipped with a 100V transformer and 4 power adjustments, also low-impedance operation (20 ohms) is possible. Features: - Certified by EN 54-24 standard - Certified by BS 5839, Part 8 British Standard - IP66 protection - The impact-resistant ABS housing UL94V0 in RAL 7035 - PG11 connector - 4 power adjustments

The XS01 is an autonomous smoke detector with a sleek and minimalist design, featuring high sensitivity (thanks to the latest photovoltaic technology), a 10-year battery life, and a loud alarm of over 85 dB. Features: - Certified by UL 217, EN 14604:2005 standard - High sensitivity - 10-year battery life - loud alarm over 85 dB - with flashing LED indicator - Test and mute button

Natron WE-A is an addressable wireless gateway module designed for operation with iRIS8 and iRIS4 addressable fire alarm panels. Natron WE-A is powered directly by the loop line and can be controlled via the communication protocol. Up to 5 Natron WE-A wireless getaway modules can be connected to a single iRIS8/iRIS4 fire alarm control panel. Natron WE-A communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Each wireless device receives an own address in the panel configuration and can be managed independently. Natron WE-A is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. Features: - Standards applied: EN 54-18; EN 54-17; EN 54-25 - Built-in isolator module - Up to 5 wireless gateway to iRIS8/iRIS4 addressable panel - Up to 32 NATRON series wireless devices enrolled to a gateway module - 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

Natron WE-C is a wireless gateway module designed for operation with conventional fire alarm panels, including MAG series panel, produced by Teletek Electronics JSC. Natron WE-C is powered from external power supply with back-up battery. The module is equipped with special inputs for monitoring the main and back-up power supplies. Up to 5 Natron WE-C wireless getaway modules can be connected to a single conventional fire alarm control panel. Natron WE-C communicates with Natron series wireless devices enrolled to its configuration. Up to 32 wireless devices can be enrolled to each gateway module, giving a total of 160 wireless devices per system. Natron WE-C is mounted in a compact plastic enclosure box suitable for wall mounting. The information of the status of the enrolled wireless devices is presented on a LCD text display. The programming of the wireless devices parameters is from the module menus. Features: - Standards applied: EN 54-18; EN 54-25 - Specially designed to work with any conventional fire alarm panel - Direct connection to conventional zone terminal - Compatible for operation with MAG series and third-party conventional fire alarm control panels - Up to 5 wireless gateways to conventional panel/building* - Up to 32** NATRON series wireless devices enrolled to a gateway module - Up to 160 wireless devices per system - Dipole antenna, SMA connector type - Event messages for wireless device status: low battery, tamper, lost device - Menu for reviewing the signal strength of the enrolled devices - LCD display, dot matrix 16×2

- Fixation bracket for Soul/access panel. - Made of Zamak alloy, graphite color. - Allows mounting the SOUL/ACCESS panel without the use of the rain shield.

For 6502/G+ and 6502/G+ BLACK panels.

T-ART/G2+ is a multi-user intercom G2+ two-way audio headset with touch buttons. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic - Duplex audio communication - Secret audio communication and door opening - Connection to the entrance door pushbutton, which saves the use of the doorbell - Different ringing tones depending on the place from where the call was made - Status LEDs: door open, do not disturb, switched on - Volume regulation - Output to auxiliary call repeater - Intercommunication with other units of the house

ART 7 Lite/G2+ is a multi-user intercom G2+ system monitor with a 7'' color screen. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic - Surface mounting - Hands-free monitor with a 7" color screen - 7" screen with capacitive navigation buttons - High efficiency loudspeakers. - Audio communications, video, and secret door opening. - Video-spy functions, auto-start, doctor mode and do not disturb. - Intercommunication with other units of the house selectively. - Personalization of ringtones. - Connection to the entrance door pushbutton, which saves the use of the doorbell. - Output to auxiliary call repeater. - Up to 4 monitors in the same house without additional power.

ART 1/G+ is a multi-user intercom G+ IP system Speakerphone with touch buttons. Features: - Made in Spain - Degree of protection (IP)30 - TCP/IP protocol "G+" digital installation - Casing manufactured in polished ABS white color - Capacitive touch buttons with acoustic confirmation on press - Possibility to power it locally at 12Vdc, at 18Vdc using D4L-G+/PoE or DCP/G+ and DCS/G+, or at 48V standard PoE - Duplex audio communication - Privacy on audio and door open progresses - Do not disturb function with light indication - Input for doorbell apartment push button - Different call reception tones depending on where the call is coming from - Volume adjustment - Output to auxiliary call repeater - Intercommunication with other monitors in the same apartment

The Soul/Access Surface Coded Panel is a multi-user G2+ two-way video call panel equipped with a backlit metal push buttons keypad and a 150º wide-angle camera. Its case is made of Zamak alloy, graphite color, and is anti-vandal. Features: - Made in Spain - Vandal-proof: IK-07 and IP-54 are weatherproof - 150º wide-angle camera with white auto-on LEDs for night vision - LEDs indicating the different states of the system - Backlit metal push buttons with serigraphy of numbers and characters - Secret communication of audio, video, and door-opening process - Acoustic confirmation tones when pressing buttons - Relay output for the activation of two doors - Includes rain shield - Management of up to 128 apartment addresses - External CCTV camera connection terminals - 40 access PIN codes - 8 temporary access PIN codes

ART 7/G+/48 is a multi-user intercom G+ IP system monitor with a 7'' touch screen. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - TCP/IP protocol "G+" digital installation - Housing made of white ABS plastic - 7" touch screen - Hands-free monitor for surface installation - High efficiency speakers - Possibility to power it locally at 12Vdc, at 18Vdc using D4L-G+/PoE or DCP/G+ and DCS/G+, or at 48V standard PoE - Virtual keyboard for call dialing - Outdoor panel tracking function - Image memory for up to 100 photos (internal storage) - Automatic image deletion function after 30 days - Personalization of background color and ringtones - Monitoring of CCTV cameras with ONVIF protocol (up to 32) - 12Vdc alarm output - 4 zones alarm input: PIR, gas sensor, fire... - Connection via RJ-45 connector