Addressable

SensoIRIS B124 Black is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Color Black - Low-profile design - Reliable contact system - Possibility of locking the detector to the base

SensoIRIS BSOU IS Black is аn addressable firebase with a built-in sounder and isolator module in its body. SensoIRIS BSOU IS Black is designed for installation in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. The addressable SensoIRIS BSOU IS Black firebase supports 32 different tone types at two sound levels The device is designed for easy installation and consists of two parts: mounting plane basis and sounder and strobe in a common body with factory mounted firebase. Features: - Selectable sound level – LOW (82-92dB)* and HIGH (100-103dB)* - 32 sound types selectable from the panel - Loop powered - EN54-3 and EN54-17 Certified - Compatible with SensoIRIS addressable detectors series: T110, T110 IS, S130, S130 IS, M140 and M140 IS

SensoIRIS WSST IS EN54-23 is аn addressable VAD (Visual Alarm Device) Wall Mount Sounder and Strobe with built-in isolator module, designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. SensoIRIS WSST IS is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. SensoIRIS WSST IS is certified according to EN54-3, EN54-17 and EN54-23 in LPCB! Features: - Selectable sound level – LOW (80-88dB)* and HIGH (92-98dB)* - 32 sound types selectable from the panel - Piezo sounder - White LED flash - Loop synchronization - Transparent plastic case - EN54 – 23/3/17 certificated

SensoIRIS WSST EN54-23 is аn addressable VAD (Visual Alarm Device) Wall Mount Sounder and Strobe, designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. SensoIRIS WSST EN54-23 is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. SensoIRIS WSST EN54-23 is certified according to EN54-3 and EN54-23! Feature: - Selectable sound level – LOW (80-86dB)* and HIGH (92-97dB)* - 32 sound types selectable from the panel - Piezo sounder - White LED flash - Loop synchronization - Transparent plastic case - EN54 – 23/3 certificated

SensoIRIS WS IS is an addressable siren with strobe light that works with fire panels that support the TTE communication protocol. The device is powered from the panel and can be controlled remotely. SensoIRIS WS IS compatible with bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. Features: - Certified by EN54-3 and EN54-17 standard - Sound level selection - Selection of 32 different tones of sound - Piezo siren - Circuit synchronization

SensoIRIS WSB IP65 is a waterproof protected deep base specially designed for outdoor installations of addressable sounders SensoIRIS series. The deep base is suitable for wall mounting in applications in aggressive environments requiring IP65 protection of the devices. SensoIRIS B124 standard base is mounted with screws. Features: - Certified by EN 60529 standard - Protection IP65 - Surface mounting - wire max. Cross section 3 mm - Compatible with SensoIRIS series directional sirens

SIMPO TTE loop is a circuit expander for the addressable fire panel SIMPO. Through it, additional 250 devices can be added to the circuit. The circuit extender supports the TTE communication protocol. Features: - Ability to connect a maximum of 250 devices - circuit devices max. consumption - 0.5 amp

IRIS TTE loop is a loop expander for 1 loop in IRIS 8 Addressable Fire Alarm Systems. The loop expander supports TTE communication protocol and is designed to operate with SensoIRIS detectors, modules, and sirens. Feature: - Communication Protocol: TTE (Teletek Electronics) - Maximum number of devices: up to 250 - Maximum consumption of the loop devices: 0.5A

TTE LAN is a universal transmission module for alarms and other events. It can be used as a fire and security alarm panel, and as a separate condition, independent separately. TTE LAN module, SIMPO and ECLIPSE panels with safety serial communication method, and panels of other manufacturers - with 6 replacement/output terminals (I/O 1 - I/O 6). TTE can also be used for remote control and monitoring of various devices. Features: - It has an indication of the connection to the network and the panel - It can be programmed remotely with AJAX SP PRO/MobileTTE (iOS/Android) applications - Micro USB port, software to connect to ProsTE - Serial communication method with SIMPO and ECLIPSE panels - 6 programming inputs/outputs, collector type (100mA each) - Ability to write network settings manually

Redundant module is used to create an RS485 protocol network between address panels SIMPO, IRIS, IRIS PRO. The module allows up to 32 fire protection panels to be connected to each other in a network. The maximum distance between two Redundant modules is 1000 m. Features: - panels max. Number in the network - 32 - Communication method - RS485 - The module is connected to the motherboard of the panel - programmable from the panel - Feeding from the panel - Max. Distance between 2 panels - 1000 meters - Cable type - twisted pair - Cable cross-section - 0.5 – 2.5 mm²

The MINP is an addressable module with one input. The main purpose of the module is to connect external devices (e.g., gas detectors, panic switches, external switches) and transfer their status to the control panel. This device is compatible only with fire control panels that support the TTE communication protocol (IRIS8, IRIS4, SIMPO). The small size of the module allows it to be built directly into the mounting box of another device (PCB only) or mounted on a wall using a special plastic box. The module operates in Latch mode, meaning that after activation, it remains in the alarm state until it receives a Reset command from the panel. Features: - The module can be programmed for various applications, such as Fire (FIRE), Gas Leak (GAS), Panic (PANIC), or simply Input signal (INPUT) modes. - The module constantly monitors the input signal and transfers information (ON/OFF) to the control panel. - After activation, the module maintains the alarm state until it receives a Reset command from the panel. - Fully compatible with addressable panels supporting the TTE communication protocol (IRIS8, IRIS4, SIMPO).

SensoIRIS MiniOUT is a compact addressable module with single non-monitored output. The module is designed for built-in installation in the external devices or directly for wall mounting. SensoIRIS MiniOUT is powered bythe fire panel . The non-monitored relay output is suitable to switch of 24V AC voltage circuits. The output terminals are wired with color cables for easy recognition during the module’s installation. Features: - Complies with the requirements of EN54-18 - Compact size - One non-monitored output - Powered from the fire panel - Color cables for easy recognition - Compatible with Teletek Addressable control panels iRIS 4 / 8 and Simpo

SensoIRIS MIO22 is an addressable input-output module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors 2 analogue input signals and controls 2 relay outputs. SensoIRIS MIO22 is powered on from the fire panel and can be controlled via the communication protocol. Features: - 2 Inputs - 2 Outputs - Loop powered - Built-in isolator - Placed in plastic box with transparent cover for easy inspection - EN54-18, EN54-17 certified

SensoIRIS MIO04 is an addressable module with 4 outputs. It is intended for addressable fire protection systems working on the TTE communication protocol. The SensoIRIS MIO04 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 speakers - Feeding from the circuit - Integrated isolator - Certified EN54-18, EN54-17:2005

SensoIRIS MIO40 is an addressable module with 4 inputs. Designed for addressable fire protection systems working on the TTE communication protocol. SensoIRIS MIO40 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 entrances - Feeding from the circuit - Integrated insulator - Certified EN54-18, EN54-17:2005

SensoIRIS MC-Z is an addressable conventional zone module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors the state of the connected conventional fire line and reports its status to the control panel. SensoIRIS MC-Z is powered on from the fire panel and can be controlled via the communication protocol. Features: - Max number of detectors in one zone – 32 - Built-in isolator - Placed in a plastic box with a transparent cover for easy inspection

SensoIRIS MOUT240 is an electrical mains switching relay output control module designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module provides interface for 240V and it is suitable for control of 240VAC voltage circuits. Features: - BOSEC certified - Suitable for control of 240VAC voltage circuits - Loop powered - Built in isolator - Placed in plastic box with transparent cover for easy inspection

SensoIRIS MOUT is an addressable monitored output module for connecting of conventional sounders. The module is designed for application in addressable fire alarm systems, supporting TTE communication protocol. SensoIRIS MOUT has a built-in isolator. Features: - BOSEC certified - Provides interface between a zone of conventional sirens and an addressable control panel IRIS or SIMPO - Loop powered - Built-in isolator - Placed in plastic box with transparent cover for easy inspection

The loop tester is a diagnostic device for cable test prior to detectors installation, for loop continuity test after devices installation, and for auto-addressing. Features: - Power supply from 220 V AC grid and Adaptor included - For cable test until detectors and sirens are still not mounted - Loop or Line tests available - Total loop test report or single test available - Loop Short/Loop Break localization for both Addressed and Unaddressed loop - Branch detection with report for number of devices and begin/end point - All Methods of Addressing available. - Easy navigation with 4 buttons only and turn ON/OFF switch

SensoIRIS Programmer is a programming tool for assigning addresses of SensoIRIS devices (detectors, modules, call points, and sounders), supporting communication protocol TTE. The programmer is designed for reading and writing addresses and setting parameters to SensoIRIS series addressable detectors and modules. Features: - Built in SensoIRIS B124 standard base - Mobility in operation - Multilingual support - Optional battery power supply 4×1,5V (not included) - The kit includes: cables for programming SensoIRIS modules; AC-DC adapter

Duct Detector housing is a special box that works in combination with standard smoke detectors. The design allows the air from the duct to pass through the device, while analyzing it for the presence of smoke particles. The DUCT detector includes 2 pipes sampling pipe and outlet pipe, as each of them is 27 cm long. The housing is compatible with SensoIRIS B124 and SensoMAG B24 bases for connecting SensoIRIS S130 and SensoMAG S30 respectively. Features: - Detects and limit the spread of smoke inside the building HVAC ducts - Compatible with SensoIRIS B124 and SensoMAG B24 bases - Easy to access box - Transparent lid for device status visibility - Sampling and outlet pipes included (27 cm) - Mounting gasket included