Fire alarm

The Fireray One is a beam smoke detector. The Fireray One is equipped with the One Minute Auto-Alignment™ feature, which ensures automatic alignment after positioning the laser onto the reflector and activating the system. It is equipped with Building Movement Tracking™ technology, which ensures the automatic correction of deviations caused by building movement and maintains precise beam alignment. Features: - Integrated user interface - Alignment mode switch, alignment direction buttons, and duration switches for alarm response threshold - Alignment status indicator - 2 green LEDs and 1 yellow LED - Green LED flashes every 10 seconds during stability - The red LED flashes every 10 seconds during a fault - Yellow LED flashes every 10 seconds for contamination or every 5 seconds for contamination

Fireray Long Range Kit 1010-000 is an accessory that increases the operating range of 6010-100 Fireray One from 50m to 120m.

The 400-003 is a high-sensitivity, non-addressable Carbon Monoxide (CO) detector designed for integration into fire detection and safety systems. The device utilizes an advanced semiconductor gas sensor, ensuring early detection of toxic gas and high immunity against false alarms. This model (400-003) is a 4-wire system detector equipped with a built-in sounder (siren) and a relay output, allowing for the control of auxiliary devices (e.g., ventilation, shut-off valves) during an alarm. Its compact and low-profile design easily fits into any interior Features: - Reliable Protection: Effectively detects dangerous concentrations of Carbon Monoxide (CO). - Universal Compatibility: Works with 4-wire non-addressable and addressable (via zone monitor module) systems. -Autonomous Functions: Features a built-in 85 dB sounder and a relay output (NO/NC). - Easy Operation: Requires no sensor calibration or replacement; features an Auto-reset function when gas levels decrease - Compliance with Standards: Certified according to UL 2075 and EN 50291 standards.

MAGEOL impedance, end-of-line zone modulus.

The ES809-RST is an evacuation direction indicator device that indicates the location of the nearest exit in a building. It is an important element for ensuring fire safety. Features: - certified by ISO 7010:2019 / 60598-2-22:2014 standard - 10 LED lamps - LED indicator - 5 installation methods - IP20, IK10 protection - Test button - Emergency Pack 3.6V 0.6Ah The set includes: - Mounting accessories for wall, ceiling, hanger, and corner mounting - 5 different directional stickers Note: - The suspended ceiling bracket is not included in the kit and can be purchased separately.

The OT-ES8119 is an IP65-rated LED evacuation sign designed for both indoor and outdoor use. This model features a Self + Remote Test system. The luminaire is equipped with a LiFePO4 (Lithium Iron Phosphate) battery, ensuring long service life and environmental protection. It features two operating modes: Maintained and Non-maintained. Installation options include: ceiling, wall, hanging, and recessed mounting. Features: - High protection level (IP65): Waterproof and dustproof housing. - Equipped with automatic self-testing (monthly and annual) and Remote Test functions. - LiFePO4 battery: Safe and durable battery with 3.2V 3.2Ah capacity. - Operates for 3 hours in emergency mode. - Consumes only 4.0W (Maintained) and 1.5W (Non-maintained). - The kit includes accessories for various installation types.

The OT-HLB4 is a Smart LED Emergency Light. This model features a universal operating mode: the same luminaire can work in both Maintained (always on) and Non-maintained (emergency only) modes, which is easily adjustable during installation. The luminaire is designed for indoor use (IP20 protection level). It is equipped with a Ni-Cd (Nickel-Cadmium) battery, ensuring reliable operation in case of power failure. The housing is made of ABS plastic and polycarbonate. Features: - Switchable between Maintained and Non-maintained modes via jumper (wiring configuration). - Equipped with a test button (Manual Test) to check functionality. - Uses 15 pcs SMD 2835 LED chips, providing 100 lumens of clear illumination. - Complies with EN 60598-2-22:2021 and ISO 7010 standards. - The kit includes mounting accessories and a set of pictograms

OT-OLB03S-18RST is an emergency evacuation light that turns on in the event of a mains power failure. It can also be used as an evacuation direction indicator, indicating the location of the nearest exit in the building. It is an important element for ensuring fire safety. Features: - certified by 60598-2-22:2014 / EN62034 standard - Material 100% polycarbonate - LED chips 18 pieces 2835 - LED indicator - Battery 3.6V 1.2Ah - IP65 protection The set includes: - Installation accessories - 4 directional stickers

The OT-ECL3-M is an LED Emergency Downlight. This model can be installed as either a recessed or surface-mounted (ceiling mounting) fixture. A key advantage of this luminaire is its Self-test system. The luminaire automatically performs a functional test every 30 days and a duration test annually, eliminating the need for manual inspection. It is equipped with a LiFePO4 battery, providing 3 hours of emergency lighting in the event of a power failure. Features: - The luminaire combines both maintained (always on) and Non-maintained (emergency only) modes, selectable during installation. - The RST version supports remote testing via a dedicated controller. - Environmentally friendly and durable 3.2V 1.5Ah battery with a 3-hour operation duration. - 7 pcs SMD 2835 LED chips provide 300 lumens during mains operation and 150 lumens in emergency mode.

Remote control for easy testing of emergency lights

The XS01 is an autonomous smoke detector with a sleek and minimalist design, featuring high sensitivity (thanks to the latest photovoltaic technology), a 10-year battery life, and a loud alarm of over 85 dB. Features: - Certified by UL 217, EN 14604:2005 standard - High sensitivity - 10-year battery life - loud alarm over 85 dB - with flashing LED indicator - Test and mute button

The AW-D611 is a standalone smoke detector. The device does not require wiring and operates on a battery. The detector is equipped with a red LED indicator that provides visual signaling in all directions. In normal mode, the indicator flashes once every minute. When smoke is detected, both the sound signal and the LED light are activated. The device features a special test button that allows you to check the detector's operation or mute the sound signal during an alarm. Also, in case of a low battery, the system automatically emits a warning signal. Features: - Surface mounting - Loud sound warning - LED indicator - Wireless connection, easy to install - Automatic alarm when under low battery voltage - Complies with the latest EN-14604 standards

Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations. Features: - Detector manufacturer approved - Designed for use with the Solo 330/332 dispensers - Non-toxic - Silicone free

FIRETEXT2 is a certified stand-alone smoke and carbon dioxide alarm GSM detector that sends a message in the form of SMS. Features: - Integrated GSM module - Battery 9V lithium 1200 mAh ANSI/NEDA 1604LC - Test button - LED indicator

The Natron SD is a wireless optical-smoke detector that integrates into the system via Natron WE-A or Natron WE-C receiver modules (Gateways). The device utilizes a bi-directional radio communication protocol (Beacon+), providing a signal coverage range of up to 1500 meters in an open area. Due to the energy efficiency of the protocol, the detector's autonomous operational lifespan lasts for up to 10 years. For local notification during an alarm, the device is equipped with a built-in 80dB buzzer, while an integrated tamper switch is provided for removal control. Features: - LED indicators for 360° visibility - Selectable sensitivity adjustment -

Natron TD is a wireless fire heat detector compatible with Natron WE-A and Natron WE-C network expanders. The device meets the requirements of the EN 54-5 and EN 54-25 standards. The system uses the Beacon+ bi-directional wireless communication protocol, providing a stable connection within a radius of up to 1500 meters in an open space. Thanks to the energy-efficient protocol, the battery life reaches up to 10 years. The sensor is designed for indoor installation only. Features: - Supports two heat detection methods: fixed temperature and rate-of-rise - Thermal class (A1/R, A2/S) selection and sensitivity adjustment can be made directly from the panel or module menus - Equipped with an integrated 80dB buzzer - Has a built-in tamper switch to protect the device from unauthorized interference and removal - Provides 360° visibility via LED indicators and features a signal coverage test function

The Natron MD is a wireless combined detector that integrates both smoke and heat sensors. For system integration, the device connects to the overall network via Natron WE-A or Natron WE-C wireless modules (Gateways). The device utilizes a bi-directional wireless communication protocol (Beacon+), allowing the communication range to reach up to 1500 meters in an open area. The efficiency of the protocol also saves energy. The detector operates on three CR123A type batteries, offering an autonomous battery life of up to 10 years. Additionally, the device features a built-in 80dB sounder (buzzer) for a local alarm upon fire detection, as well as an integrated tamper switch to protect against unauthorized interference. Features: - Bi-directional wireless communication - Combined — Smoke and Heat detector - LED indicators for 360° visibility - Built-in 80dB sounder (buzzer)

The SensoMAG BM120 is a reflective linear optical smoke detector that is compatible with both MAG series and other manufacturers' fire alarm control panels. The device is powered by an external 24VDC power source. Using the 4 reflective plates included in the package, the effective detection distance covers a range from 50 to 120 meters. The device features an automatic calibration function for the detection module , while precise alignment during the installation process is achieved using an integrated laser pointer. Configuration of the detector's sensitivity parameters is managed via DIP switches located on the main board. Features: - Detection distance: 50–120 meters - Coverage area (width): 15 meters (7.5 meters on each side) - Auto-calibration mode - Self-compensation algorithm

The SensoMAG BM60 is a reflective linear optical-smoke detector compatible with MAG series fire alarm panels, as well as third-party systems. The device operates on an external power source (24VDC). The detector comes with a single reflector, which ensures a smoke detection range of up to 60 meters. Its integrated laser pointer simplifies the installation and alignment process. Features: - Coverage area width — 15 meters (7.5 meters on each side) - Auto-calibration mode - Sensitivity adjustment via DIP-switches - Self-compensation algorithm

SensoIRIS BM60 is an addressable reflective linear optical-smoke detector compatible with IRIS4, IRIS8, and Simpo X addressable fire alarm control panels. The detector is powered directly from the loop, although it can also be connected to an external power source (24VDC) if needed. The device comes with a single reflector, which can detect smoke with a maximum range of up to 60 meters. The BM60 model integrates an automatic calibration function for the sensor mechanism, and it also features a built-in laser pointer for precise alignment. The sensitivity adjustment of the SensoIRIS BM60 is done directly from the fire alarm panel menu, rather than on the device itself. Features: - Detection range — 60 meters - Coverage area width — 15 meters (7.5 meters on each side) - Auto-calibration mode - Laser pointer for alignment

SensoIRIS BM120 is an addressable reflective linear optical-smoke detector compatible with IRIS4, IRIS8, and Simpo X addressable fire alarm panels. The detector is powered directly from the loop, although it can also be connected to an external power source (24VDC) if needed. The device comes with 4 reflective plates, which ensures smoke detection in the range of 50 to 120 meters. The BM120 model integrates an automatic calibration function for the sensor mechanism and features a built-in laser for precision and easy installation. Similar to the 60-meter version, the sensitivity adjustment of the SensoIRIS BM120 is done directly from the fire alarm panel menu. Features: - Detection range — 50 to 120 meters - Coverage area width — 15 meters (7.5 meters on each side) - Auto-calibration mode - Laser pointer for alignment

The SCP2RK is a specialized test key set designed for the testing and resetting of manual call points (MCP) manufactured by Teletek. The key allows for the verification of the button's operational efficiency without breaking the protective glass. Features: - The key works on two models: SensorMAG MCP50 (conventional) and SensoIRIS MCP150 (addressable). - It enables the functional testing of the fire alarm button without breaking or damaging the protective glass or plastic insert. - The product is supplied as a 5-piece set.

IRIS8 is Expandable Addressable Fire Alarm Control Panel, the most powerful and sophisticated intelligent addressable fire alarm panel in Teletek Electronics portfolio. Intelligent and technically advanced, it has enhanced integration and networking capabilities to meet the current and future needs of small to larger buildings and installations. The initial purpose of iRIS8 is to be used for fire alarm warning but due to its flexible design, it can be modified to carry out many other functions like control and indication applications, with direct integration into intelligent buildings through MODBUS protocol. The available configuration varies from 1 to 8 detection loops. iRIS8 can network up to 64 panels, making it ideal for the largest sites including schools, hospitals, multi-site retail/supermarkets, critical infrastructure, and major commercial and industrial facilities. iRIS8 supports two protocols for communication in order to provide a vast range of devices and cope with the most demanding projects. Combined with the modular structure and the networking features there is no project which can’t be realized with iRIS8. Features: - Adapted to the Georgian language (a wide selection of menu languages) - Ability to include controllers from 1 to 8 circuits - Connecting up to 2000 devices in one system - Ability to store up to 10,000 events - 7" TFT (color) screen - 200 LED indicators for alarm zones - Fire panel signal receiver (Input) - Detection of devices with the same address and exact location in the circuit - Short circuit detection and exact location in the circuit - detection of a break in the circuit - ModBUS TCP/IP protocol - Changing the company logo on the main screen - Cloud server - mobile app access for remote control - Built-in LAN network card

iRIS8 is an Expandable Addressable Fire Alarm Control Panel, the most powerful and sophisticated intelligent addressable fire alarm panel in Teletek Electronics portfolio. Intelligent and technically advanced, it has enhanced integration and networking capabilities to meet the current and future needs of small to larger buildings and installations. The initial purpose of iRIS8 is to be used for fire alarm warning but due to its flexible design, it can be modified to carry out many other functions like control and indication applications, with direct integration into intelligent buildings through MODBUS protocol. The available configuration varies from 1 to 8 detection loops. iRIS8 can network up to 64 panels, making it ideal for the largest sites including schools, hospitals, multi-site retail/supermarkets, critical infrastructure, and major commercial and industrial facilities. iRIS8 supports two protocols for communication in order to provide a vast range of devices and cope with the most demanding projects. Combined with the modular structure and the networking features there is no project which can’t be realized with iRIS8. Features: - Adapted to the Georgian language (a wide selection of menu languages) - Ability to include controllers from 1 to 8 circuits - Connecting up to 2000 devices in one system - Ability to store up to 10,000 events - 7" TFT (color) screen - 200 LED indicators for alarm zones - Fire panel signal receiver (Input) - Detection of devices with the same address and exact location in the circuit - Short circuit detection and exact location in the circuit - detection of a break in the circuit - ModBUS TCP/IP protocol - Changing the company logo on the main screen - Cloud server - mobile app access for remote control - Built-in LAN network card