Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations. Features: - Detector manufacturer approved - Designed for use with the Solo 330/332 dispensers - Non-toxic - Silicone free

Natron SD Wireless optical-smoke detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. The signal coverage of the Natron SD reaches up to 1500 (in open area), thanks to our bidirectional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with 2x CR123A type of batteries. The Natron SD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-7 and EN 54-25 certificated - Bi-directional wireless communications - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years

WIFI IP Camera 2MP, SD, 2.8 mm, UHO-BIR-M2F4 Bullet. Features: - High quality image with 2MP, 1/2.9"CMOS sensor - 2MP (1920*1080)@30/25fps; 720P (1280*720)@30/25fps - Ultra 265, H.265, H.264, MJPEG - Built-in Mic - Smart IR, up to 30m (98ft) IR distance - Supports 128 G Micro SD card - IP67 protection - 3-Axis

Series Simon 15 double switch. Color - Champagne. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Type of device: double switch - Material: thermoplastic - Color: Graphite - Security IP: 20 - Certificate: EAC declaration

SF 300 is an outdoor conventional piezo siren. It has a flat plastic cover, suitable for logo stickers with dimensions up to 220x160mm. The siren is equipped with 2 LED flash indicators. Features: - LED strobe - IP44 protection for electronics -Flat cover for logo sticker - EN 54 – 3 Certified - Two piezo sounders

Natron MD Wireless combined detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron MD combines an optical-smoke and a thermal/heat detection parts. The signal coverage of the Natron MD reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with 3x CR123A type of batteries. The Natron MD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-5; EN54-7 and EN 54-25 certificated - Bi-directional wireless communications - Combined – Smoke and Heat detector - Thermal part type – Rate-of-rise - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years Bi-directional wireless communications Combined – Smoke and Heat detector Thermal part type – Rate-of-rise LEDs indication for 360° visibility Built-in 80db buzzer Tamper switch Sensitivity adjustment Signal coverage test Protection – IP30 Coverage range – 1500 m open area Long battery life – up to 10 years EN 54-5; EN54-7 and EN 54-25 certificated

WIFI IP Camera 2MP, SD, 4.0 mm, UHO-BIR-M2F4 Bullet. Features: - High quality image with 2MP, 1/2.9"CMOS sensor - 2MP (1920*1080)@30/25fps; 720P (1280*720)@30/25fps - Ultra 265, H.265, H.264, MJPEG - Built-in Mic - Smart IR, up to 30m (98ft) IR distance - Supports 128 G Micro SD card - IP67 protection - 3-Axis

ESIM384 is a control system control panel that is connected to other components of the system, such as detectors, sirens, keyboards, and so on. In the event of an alarm, the control panel will forward appropriate notifications to the owner and/or security service for further response. The panel has an integrated GSM transmitter and can connect both wired and wireless devices.

Wireless heat detector, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron TD supports two heat detection methods – fixed temperature and rate-of-rise types. The signal coverage of the Natron TD reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with a single CR123A type of battery. The Natron TD is also equipped with an internal buzzer, used for local sound signaling in case of detector activation (fire condition), as well as build-in tamper switch. Features: - EN 54-5 and EN 54-25 certificated - Bi-directional wireless communications - Selectable Heat detection type – Fixed or Rate-of-rise - Thermal class – A1R, A2S and BS - LEDs indication for 360° visibility - Built-in 80db buzzer - Tamper switch - Sensitivity adjustment - Signal coverage test - Protection – IP30 - Coverage range – 1500 m open area - Long battery life – up to 10 years

EWP3 contains an innovative dual PIR technology, precisely senses motion and immediately alerts the user in case of the first signs of intrusion. The alert will be sent only when both PIR sensors are triggered. This feature eliminates false alarms from pets or lights. Innovative Eldes wireless technology enables users to reach an impressive, up to 3 km wireless range in open areas. You won’t need to change the batteries every few months – EWP3 contains a smart battery-saving mode, which ensures a battery life-time of up to 3 years! EWP3 is designed to reduce the number of false alarms. If you have pets weighing up to 40 kg, this is a great feature – it won’t trigger the alarm while your pets are home alone.

Natron MCP Wireless manual call point, compatible with both – Natron WE-A and Natron WE-C wireless gateways. The signal coverage of the Natron MCP reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 10 years, with a single CR123A type of battery. Features: - EN 54-11 and EN 54-25 certificated - Type of the working element – Resettable (flexible) - Type A - Tamper switch - Optional protective plastic cover - Rate of protection IP40 - Coverage range – 1500 m open area - Signal coverage test - Long battery life – up to 10 years

Innovative ELDES wireless technology enables users to reach an impressive up to 3 km range in open areas. Thick walls and multiple-store properties are no longer an obstacle. You won’t need to change the batteries every few months – EWKB4 contains 3x batteries with up to 6-year battery life.

Wireless gateway modules for integration of Natron wireless devices to iRIS addressable fire series of Wireless wall sounder and strobe, compatible with both – Natron WE-A and Natron WE-C wireless gateways. Natron WSS supports 32 different sound types, selectable from the iRIS panels, as well as two sound levels – high and low. The signal coverage of the Natron WSS reaches up to 1500 (in open area), thanks to our bi-directional wireless communication protocol – Beacon+. The protocol efficiency also contributes to the exceptional battery life that could last to up to 8 years, with 4x CR123A type of batteries. Features: - EN 54-3; EN 54-23; EN 54-25 certificated - Bi-directional wireless communications - Selectable sound level – LOW (80-86dB)* and HIGH (92-97dB) - 32 sound types selectable from the panel - Piezo sounder and white flash - Tamper switch - Signal coverage test - Protection – IP31 - Coverage range – 1500 m open area - Long battery life – up to 8 years

EKB2 is designed to be a perfect device for any interior: a slim-line glass body with a touchscreen delivers the best user experience. The informative LDC screen displays real-time information about zone status, time, temperature, GSM level, and possible faults. EKB2 is a perfect device for the full control of your home security system: arm/disarm whole premises or particular areas, set duress code to silently alert the security company. The backlight of buttons allows you to use the device even late at night or early in the morning. EKB2 can also be used as a backup way for the security system configuration if you do not have an access to Eldes Utility.

Wireless Door/Window Sensor EWD3 EWD3 is designed to protect doors, windows, or even drawers. It senses opening and vibration to inform a user if they attempt to break in happens and measures home temperature. Innovative Eldes wireless technology enables users to reach an impressive up to 3 km range in open areas. You will not need to change the batteries every few months – EWD3 contains amazing up to 5-year battery life! EWD3 is designed to expand the security system’s capabilities and protect entrances 24/7. An integrated shock sensor warns the user about attempting to break a door or a window. Adjustable vibration sensitivity won’t let your noisy neighbors trigger the alarm. EWD3 can be used for home automation, e.g. the system can turn off the heating while windows are opened!

OS201-BK60 is a single subscriber call panel. Features: - Metal body - mechanical button (silver color) - Rain cover - IP65 waterproof - Includes 45° angle bracket for wall mounting - LED lighting for night vision.

SensoIRIS MiniOUT is a compact addressable module with single non-monitored output. The module is designed for built-in installation in the external devices or directly for wall mounting. SensoIRIS MiniOUT is powered bythe fire panel . The non-monitored relay output is suitable to switch of 24V AC voltage circuits. The output terminals are wired with color cables for easy recognition during the module’s installation. Features: - Complies with the requirements of EN54-18 - Compact size - One non-monitored output - Powered from the fire panel - Color cables for easy recognition - Compatible with Teletek Addressable control panels iRIS 4 / 8 and Simpo

Series Simon 15 Three-way switch. Color - Champagne. Compatible with Simon 15 frames. Features: - Series: Simon 15 - Compatibility: Simon 15 frame - Type of device: Three-way switch - Material: thermoplastic - Color: Champagne - Security IP: 20 - Certificate: EAC declaration

CP1202-2A power supply unit, DC12V, 2A

OS203-SL60 Gray call panel, built-in relay. - Metal main body acrylic front panel with manual button, silver color. - Surface mounted, with rain cover and angle bracket; anti-vandal. - HD 1.0 megapixel camera; wide angle 110°. - 2-way communication. - With white LED light for night vision. - Voice reminder and motion detection.

CP1203-3A power supply unit, DC12V, 3A

MT752-B is a single subscriber intercom monitor, white color. With the monitor it is possible to talk to the guest standing at the door and open the lock. Features: - 7" LCD screen - Touch buttons - Adjusting the duration of the call - Integrated 220V power supply unit - 4 pin connection scheme - Max 4 monitors and 2 call panels in the system

TTE GPRS Simple VG is a GSM/GPRS module for communication with Teletek Electronics Eclipse series panels. A module for usage protection and sending alarm messages to the end user. In the alarm module, the user will send an SMS and a call. TTE GPRS Simple VG can also be remote control, software and monitoring of Eclipse series security system via AJAX SP PRO software. Features: - 2 GB micro SD card for voice notifications - voice reporting and voice control (pick up/drop off) - Sending SMS messages about events - LED lights indicating network status - Ability to connect to AJAX WEB and MobileTTE (iOS/Android) applications - Connection to AJAX SP server - Main IP and Backup IP for communicating with AJAX SP PRO - Micro USB port for module configuration via ProsTE - Serial communication with ECLIPSE series control panels

EPGM1 is a hardwired zone and PGM output expansion module intended for use with ELDES alarm systems. The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones, 2 Programmable outputs (PGM) each providing up to 250mA, auxiliary equipment power supply that provides 13,8V 500 mA. ESIM364 and ESIM384 support 2 EPGM1 modules.