Detectors

The A9030T is an addressable smoke detector designed to operate with the SEC3002 fire alarm control panel. It determines smoke concentration in real-time, transmits the data to the control panel, and executes commands received from it. Features: - Features an automatic compensation function for temperature, humidity, and dust accumulation (drift compensation) along with sensor fault diagnostics - Designed with a two-part housing (upper and lower covers) and an independent mounting base, making device installation and expansion convenient - Equipped with a remote indicator output terminal that activates an external emergency light during an alarm - Provides full electronic coding and address rewriting directly on-site via a programmer

The A9020T is an addressable point-type heat detector designed to operate with the SEC3002 fire alarm control panel. It collects real-time ambient temperature data, transmits it to the control panel, and accurately executes control commands received from the panel. Features: - Features an automatic temperature compensation mode and a sensor fault detection function for fault reporting to the control panel - Designed with an upper and lower cover and installed on an independent base, making device installation and maintenance convenient - Equipped with a built-in remote indicator output terminal that activates an external indicator light during a fire alarm

The A9036T is an addressable multisensor fire detector consisting of an optical smoke sensor and dual thermal (heat) sensors. It simultaneously combines the operating principles of both a photoelectric smoke detector and a heat detector. The device operates on a non-polarity two-wire bus. Features: - Features a low-profile design and a 360° red LED alarm indicator - Has a built-in microcontroller (MCU) for real-time data processing and analysis - Automatic compensation for temperature, humidity, and dust accumulation (drift compensation) along with fault diagnostics - Offers 5 different operating modes, which are configured via a programmer

The DZ-912 is a low-profile mounting base designed for fire detection devices. It provides a stable platform for terminal connections while maintaining a discrete aesthetic. Features: - Applicable to A9030T, A9020T, A9036T, C9030T, and C9021T devices - Features a slim, compact, and low-profile design

The D9057B is an isolator base used to protect the fire alarm system from short-circuit faults. When a short circuit occurs on the loop, the base responds quickly and automatically isolates the damaged section. Once the fault is cleared, the base automatically exits isolation mode and reconnects the previously disconnected part back into the system. The device does not require coding and does not occupy an address in the system loop. Features: - Operates without occupying an address and takes up no space in the system loop - Can be used for an individual device (point isolation) as well as for a group of devices (area isolation) - Equipped with a yellow LED indicator that remains constantly lit during active isolation and turns off during normal operation

The A9060T is an addressable fire alarm manual call point that operates with intelligent two-wire control systems. When pressed after a fire is manually confirmed, the alarm signal and the device address are immediately transmitted to the control panel. Under normal conditions, its red indicator flashes, whereas in an alarm state, it remains continuously lit. Features: - Activated without breaking glass (reusable lever) and reset to its initial state using a special tool - Address configuration is performed electronically via the CODER-9001 programmer - Installed via surface or semi-flush mounting

ZJ-9060 is a specialized mounting base engineered for industrial fire alarm modules. It is made of ABS plastic. Features: - Applicable to and used with the A9060T module - Structurally easy to assemble and install

HZ911E is a linear optical beam smoke detector. It consists of two main parts: a detector and a reflector. In normal operation mode, the infrared beam emitted by the detector is reflected by the reflector and returns to the receiving tube. When a fire occurs, smoke blocks the infrared beam, resulting in a decrease in the received signal, and the system issues a fire alarm. During an alarm, the detector's red status indicator is constantly lit, and the alarm contact is closed. Features: - The device complies with the GB14003-2005 standard - The protection area is 7 meters on both sides of the beam

C9069L is a two-wire remote indicator. It can be used with both addressable and conventional detectors. When the detector triggers an alarm, the remote indicator lights up. Features: - The device consists of a top and bottom cover - Works with a non-polarity, two-wire connection

JTY-GS-T8001 is a reflective linear beam smoke detector. The device combines the transmitting and receiving parts into one housing and works in conjunction with a reflector. It features a built-in microprocessor that monitors smoke concentration in real-time and is connected to a compatible fire panel through a four-wire system. The beam detector is equipped with a laser module. The device features an automatic compensation function for dust pollution. Features: - Built-in laser module ensures quick location of the reflector position and easy alignment - Microcontroller processes data in real-time and controls environmental conditions - Features a self-diagnostic function to monitor internal faults - Equipped with LED indicators on the housing for easy control of signal strength

SensoIRIS S130 is аn addressable optical-smoke detector designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 is compatible with firebase B124 Features: - Sensitivity adjustment from the panel - Thin and simple design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS M140 is an addressable combined (temperature and smoke) detector designed for early fire detection. The detector works with panels that support the TTE communication protocol. The detector is compatible with the fire base B124. Features: - Certified by EN54-5, EN54-7 and EN54-17 standard - sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS T110 is an addressable temperature detector designed to detect fire situations at an early stage. The detector works with panels that support the TTE communication protocol. Detector SensoIRIS T110 is compatible with fire base B124 Features: - Certified by EN54-5 standard - Can work in both fixed temperature and temperature rise detection mode - Choose a class from the panel - A1R, A2S, BS - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS B124 is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Low profile design - Reliable contact system - Possibility of locking the detector to the base - BOSEC certified

SensoIRIS GAS is an addressable gas, LPG and CH4 (methane) leak detector. The gas detector has an automatic diagnostic function, it constantly checks the status of the sensor and electronics. SensoIRIS GAS is equipped with a button with the following functions: - Short press activates "SILENCING" mode, green LED flashes, buzzer and panel activation are disabled for 5 minutes. - If pressed for longer than 5 seconds, the "TEST" mode is activated, in this case the green, red and yellow LEDs are activated. The panel and buzzer are also activated. After 6 seconds, the gas detector emits 2 short beeps and turns off the "TEST" mode.

SensoMAG MCP150 is a fire alarm button with a built-in isolator module. The button is intended for addressable fire systems operating on the TTE protocol. The alarm button is activated by a finger press and sends a signal to the control panel to trigger an alarm for further response. Features: - Certified by EN54-11, EN54-17 and LPCB standard - Surface mounting - Reloadable construction - LED indicator - Includes a tool to reset the button - it is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - IP40 protection - Built-in isolator module

SensoIRIS MCP150 IP67 is a waterproof addressable manual call point designed for outdoor installations and IP67 environments, with a built-in isolator module. The call point is equipped also with a protective transparent cover for avoiding fault or accidental activation. SensoIRIS MCP150 IP67 is powered on from the fire panel and can be controlled via the communication protocol. Features: - Built-in isolator module - Surface mounting - Type (according to EN54-11) – A - LED indication - Special test tool for resetting after alarm event - Protective plastic cover - IP67 according EN 60529

The addressable manual call point is designed for application in addressable fire alarm systems, which support TTE communication protocol. The call point has a built-in isolator module which when used allows continuous operation of the loop in case of a short circuit and without the need of using additional isolator modules. The call point is powered on from the fire panel and can be controlled via the communication protocol. Features: - Working element (2 parts) - Frangible element – non-resettable (a broken glass) - Operating element – resettable (a button) - Call point type (method of operation according to EN 54-11) – B - Built-in isolator module - EN54-11 and EN54-17 certified

SensoIRIS S130 IS is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

The SensoIRIS M140 IS an addressable combined (temperature and smoke) detector with a built-in isolator that can be placed to detect fires at an early stage. The detector works with panels that support the TTE communication protocol. The detector is compatible with the firebase B124 Available in two colors: white and black Features: - Sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication - Built-in isolator - EN54-5, EN54-7 and EN54-17 certified

SensoIRIS T110 IS is аn addressable heat detector with built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. Features: - Can work as a fixed temperature or rate of rise detector - Class, selectable from the control panel – A1/R, A2/S, B/S - Low profile design - LED indication with 360° visibility - Built-in isolator - EN54-5 and EN54-17 certified

SensoIRIS S130 IS Black is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. Features: - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified