The SIMPO panel is intended for small and medium-sized objects, for installing an address system. The address panel supports expansion up to 2 circuits, and 250 devices can be connected to 1 circuit. It is also possible to divide into 48 zones. System malfunctions are visualized on the LCD screen and LED lights. Up to 64 Simpo panels can be interconnected via RS485 redundant or network LAN modules. The panel is programmed both directly with the panel buttons and through the ProsTE program. Features: - Certified by EN54 – 2/4 standard - 2 circuits, max. 250 addressing devices - Ability to connect a thermal printer - 3 modes of programming detectors: 1) auto-addressing, 2) self-addressing, 3) addressing with a programmer - 3 levels of users - Monitor, program and control with Observer - Description of Georgian-language indicators on the panel - The panel is placed in a metal box

The Repeater is a device that duplicates the information provided by the SIMPO and IRIS addressable fire panels in order to help you get information on the current situation in the premises without having to be physically close to the main panel. The connection between the Repeater panel and the main panels has been obtained by using a redundant network module based on the RS485 interface or a standard LAN network. The monitoring information is displayed on the 7” TFT Touch Screen display. There is also an LED indication available. The Repeater panel has a built-in real-time clock feature and a micro USB for programming and firmware updates. Features: - 7” TFT Touch Screen display - Build in RS485 Network module - Build in LAN module - Up to 64 nodes in the network – RS485 - Up to 1km distance between the panels - Reset/Evacuate/Silence Sounders and Buzzer of all network panels - IRIS and SIMPO compatible - Slim design - Multilanguage support - 10 000 events log - Designed according to EN54-2 - Changeable logo picture

Repeater works with Teletk fire panels IRIS, IRIS PRO, and SIMPO. Its function is to repeat all the information displayed on the screen of the fire panels on the screen of the Repeater. The repeater is used in cases when it is necessary to view and manage information about the state of the fire protection system from places where the control panel is not located, for example: the security room, administration, or others. To communicate with the panels, the Repeater needs a Redundant Network module. Event information is displayed on the Repeater's LCD screen, and it also has LED lights to indicate status. Features: - The maximum number of fire protection panels in the network - 64. - Maximum distance between two panels - up to 1000 m. - Integrated clock - Latest software and firmware update – via micro USB.

IRIS8 Ext. is an analogue addressable fire alarm loop extension. It extends the capacity of IRIS8 panel with 4 more loop controllers. IRIS8 Ext. supports two communication protocols: System Sensor series 200/500 (Loop SS) and Teletek Electronics (Loop TTE) according the type of used devices. In the configuration of the IRIS8 panel can be implemented both Loops SS and TTE at the same time. To avoid or significantly diminish problems when mounting the system it must be carefully planned prior to installation. This includes: establishing an address for every device and planning a name of maximum 40 digits (including the spaces) for each address, thereby ensuring easy access to the device. According to the acting standards for establishing fire systems and the plan of the building, the devices must be grouped in zones. Features: - BOSEC certified - Up to 4 loops, loop card expandable - Up to 250 devices per loop, 1000 total - Double address detection and localization - Short circuit detection and localization - Loop break detection

IRIS printer is a thermal printer designed for IRIS PRO addressable fire alarm panels. The printer has a modular design to integrate with the IRIS PRO and IRIS PS72 power supply module. The IRIS printer is used to print the list of events and is equipped with an independent power supply. Features: - Thermal printer in a metal box - Modular construction - Autotest and status indicator - Printing precision - 8 dots/mm, 576 dots/line - Printing speed - max 170mm/sec - 2 types of font support - 12×24 dots and 9h17 dots

IRIS PS72 is a power supply unit designed for backup power supply of IRIS PRO addressable fire alarm panel. Features: - The power supply unit is intended for internal use only - Certified according to EN54-4 standard - Protection IP30

SensoIRIS S130 is аn addressable optical-smoke detector designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 is compatible with firebase B124 Features: - Sensitivity adjustment from the panel - Thin and simple design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS M140 is an addressable combined (temperature and smoke) detector designed for early fire detection. The detector works with panels that support the TTE communication protocol. The detector is compatible with the fire base B124. Features: - Certified by EN54-5, EN54-7 and EN54-17 standard - sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS T110 is an addressable temperature detector designed to detect fire situations at an early stage. The detector works with panels that support the TTE communication protocol. Detector SensoIRIS T110 is compatible with fire base B124 Features: - Certified by EN54-5 standard - Can work in both fixed temperature and temperature rise detection mode - Choose a class from the panel - A1R, A2S, BS - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS WS is аn addressable Wall Mount Sounder and Strobe, designed for installation in addressable fire alarm systems supporting TTE communication protocol. Features: - Certified by EN54-3 standard - Sound selection - LOW (80-88dB)* and HIGH (92-98dB)* - Ability to select 32 types of sound from the panel - Piezo sounder - Loop synchronization - Transparent plasma

SensoIRIS CSST is an analogue-addressable sounder with a built-in visual indicator (strobe) and mounting base, intended for ceiling mounting. This device is designed for Teletek SensoIRIS series detectors (T10, S130, M140). Its main advantage is ease of installation and cost-efficiency: the sounder, strobe, and detector are installed at one point without additional wiring. The device is fully compatible with standard B124 and B124-HP bases. The system supports 32 tone types and 2 sound levels, which can be adjusted from the control panel. Features: - One point of installation for the detector, sounder, and visual indicator with no additional wiring. - Two sound levels - LOW: 81dB (A) ±3dB@3m; HIGH: 88dB (A) ±3dB@3m. - 32 tone types selectable from the panel. - Up to 100 sounders on loop (on low-level sound). - Frequency of the strobe flashing – 1 Hz. - -Loop synchronization for a uniform and clear alarm signal. - Loop powered. - Protection Degree - IP21C, type A. - Compatible with the SensoIRIS detector series. - Compatible with standard bases B124 and B124-HP. - Optional cover when used only as a sounder

SensoIRIS B124 is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Low profile design - Reliable contact system - Possibility of locking the detector to the base - BOSEC certified

SensoIRIS GAS is an addressable gas, LPG and CH4 (methane) leak detector. The gas detector has an automatic diagnostic function, it constantly checks the status of the sensor and electronics. SensoIRIS GAS is equipped with a button with the following functions: - Short press activates "SILENCING" mode, green LED flashes, buzzer and panel activation are disabled for 5 minutes. - If pressed for longer than 5 seconds, the "TEST" mode is activated, in this case the green, red and yellow LEDs are activated. The panel and buzzer are also activated. After 6 seconds, the gas detector emits 2 short beeps and turns off the "TEST" mode.

SensoMAG MCP150 is a fire alarm button with a built-in isolator module. The button is intended for addressable fire systems operating on the TTE protocol. The alarm button is activated by a finger press and sends a signal to the control panel to trigger an alarm for further response. Features: - Certified by EN54-11, EN54-17 and LPCB standard - Surface mounting - Reloadable construction - LED indicator - Includes a tool to reset the button - it is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - IP40 protection - Built-in isolator module

SensoIRIS MCP150 IP67 is a waterproof addressable manual call point designed for outdoor installations and IP67 environments, with a built-in isolator module. The call point is equipped also with a protective transparent cover for avoiding fault or accidental activation. SensoIRIS MCP150 IP67 is powered on from the fire panel and can be controlled via the communication protocol. Features: - Built-in isolator module - Surface mounting - Type (according to EN54-11) – A - LED indication - Special test tool for resetting after alarm event - Protective plastic cover - IP67 according EN 60529

The addressable manual call point is designed for application in addressable fire alarm systems, which support TTE communication protocol. The call point has a built-in isolator module which when used allows continuous operation of the loop in case of a short circuit and without the need of using additional isolator modules. The call point is powered on from the fire panel and can be controlled via the communication protocol. Features: - Working element (2 parts) - Frangible element – non-resettable (a broken glass) - Operating element – resettable (a button) - Call point type (method of operation according to EN 54-11) – B - Built-in isolator module - EN54-11 and EN54-17 certified

SensoIRIS S130 IS is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

The SensoIRIS M140 IS an addressable combined (temperature and smoke) detector with a built-in isolator that can be placed to detect fires at an early stage. The detector works with panels that support the TTE communication protocol. The detector is compatible with the firebase B124 Available in two colors: white and black Features: - Sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication - Built-in isolator - EN54-5, EN54-7 and EN54-17 certified

SensoIRIS T110 IS is аn addressable heat detector with built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. Features: - Can work as a fixed temperature or rate of rise detector - Class, selectable from the control panel – A1/R, A2/S, B/S - Low profile design - LED indication with 360° visibility - Built-in isolator - EN54-5 and EN54-17 certified

SensoIRIS S130 IS Black is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. Features: - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS B124 Black is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Color Black - Low-profile design - Reliable contact system - Possibility of locking the detector to the base

SensoIRIS BSOU IS Black is аn addressable firebase with a built-in sounder and isolator module in its body. SensoIRIS BSOU IS Black is designed for installation in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. The addressable SensoIRIS BSOU IS Black firebase supports 32 different tone types at two sound levels The device is designed for easy installation and consists of two parts: mounting plane basis and sounder and strobe in a common body with factory mounted firebase. Features: - Selectable sound level – LOW (82-92dB)* and HIGH (100-103dB)* - 32 sound types selectable from the panel - Loop powered - EN54-3 and EN54-17 Certified - Compatible with SensoIRIS addressable detectors series: T110, T110 IS, S130, S130 IS, M140 and M140 IS

SensoIRIS WSST IS EN54-23 is аn addressable VAD (Visual Alarm Device) Wall Mount Sounder and Strobe with built-in isolator module, designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. SensoIRIS WSST IS is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. SensoIRIS WSST IS is certified according to EN54-3, EN54-17 and EN54-23 in LPCB! Features: - Selectable sound level – LOW (80-88dB)* and HIGH (92-98dB)* - 32 sound types selectable from the panel - Piezo sounder - White LED flash - Loop synchronization - Transparent plastic case - EN54 – 23/3/17 certificated