A9058T IO Addressable Control Module 1 input/1 output

Code - 914850

Brand - Sanjiang

Description

A9058T is an addressable I/O (input/output) module used with loop-type fire alarm control panels. It is powered directly by a non-polar 2-wire loop, features low power consumption, and does not require an external 24V power supply connection. The module is installed directly on the DZ-9058 base.

Features:
- The output contact is a dry contact, without monitoring
- The module has 3 programmable working modes: normally open (NO) input signal, normally closed (NC) input signal, and equipment fire alarm and fault input signal (Mode 3)
- The address is assigned electronically via a programmer (CODER), with an address range from 1 to 324
- Equipped with status indicators (LEDs) that reflect the status of the input (INPUT ON) and output (OUTPUT ON) signals

Description / Specification

Downloads

Power Supply	Loop DC 20~28V (non-polar wiring)
Standard	EN 54-18
Quiescent Current	≤1.2mA
Activated Current	≤4mA
Relay Contact	Rated at 2A, 30V DC maximum (resistive load)
Loop	Non-polar 2-wire
End-of-Line Resistor (EOL)	47KΩ
Trigger Resistor	15KΩ
Operating Conditions	emperature: -10°C to +55°C; Relative humidity: ≤95% (40°C ± 2°C without condensation)
Dimensions (with base)	86 mm x 86 mm x 41 mm
Weight (with base)	132 grams