Security system

The SEC1000 is an addressable fire alarm control panel designed to provide constant monitoring of input signals, appropriate fire indication, and automatic activation of pre-programmed outputs. The device complies with EN 54-2 and EN 54-4 international standards. The panel features 1 operational loop that accommodates up to 120 addressable points (devices) and offers system expansion capabilities. Features: - Equipped with 1 operational loop that accommodates both Class A and Class B wiring types (the LOOP IN terminal is not used during Class B connection) - The built-in Power Supply Equipment (P.S.E) includes the PMC_01 power management control board and a Meanwell (LRS-75-24) power supply, providing constant monitoring of the mains and backup battery states - Features 16 fire zone LED indicators on the front panel for rapid visual identification

The SEC3002 is an addressable fire alarm control panel designed to monitor input signals, provide appropriate indications, and activate pre-programmed outputs. The device fully complies with EN 54-2 and EN 54-4 international standards. The panel features 1 main loop that accommodates up to 324 addressable devices and offers system expansion capabilities. Features: - Equipped with 1 operational loop (Class A type) that supports the connection of up to 324 addressable devices - Features a robust metal housing with a detachable exterior door, an operational front panel, an LCD display, and a printer integration zone - The built-in Power Supply Equipment (P.S.E) and PSE filter protect the system from momentary voltage fluctuations and automatically monitor both the mains network and backup batteries - Through an optional communication board, up to 20 panels can be networked together via a CAN bus, or up to 30 FIPs (Fire Indicating Panels) can be connected using the RS-485 protocol

The A9030T is an addressable smoke detector designed to operate with the SEC3002 fire alarm control panel. It determines smoke concentration in real-time, transmits the data to the control panel, and executes commands received from it. Features: - Features an automatic compensation function for temperature, humidity, and dust accumulation (drift compensation) along with sensor fault diagnostics - Designed with a two-part housing (upper and lower covers) and an independent mounting base, making device installation and expansion convenient - Equipped with a remote indicator output terminal that activates an external emergency light during an alarm - Provides full electronic coding and address rewriting directly on-site via a programmer

The A9020T is an addressable point-type heat detector designed to operate with the SEC3002 fire alarm control panel. It collects real-time ambient temperature data, transmits it to the control panel, and accurately executes control commands received from the panel. Features: - Features an automatic temperature compensation mode and a sensor fault detection function for fault reporting to the control panel - Designed with an upper and lower cover and installed on an independent base, making device installation and maintenance convenient - Equipped with a built-in remote indicator output terminal that activates an external indicator light during a fire alarm

The A9036T is an addressable multisensor fire detector consisting of an optical smoke sensor and dual thermal (heat) sensors. It simultaneously combines the operating principles of both a photoelectric smoke detector and a heat detector. The device operates on a non-polarity two-wire bus. Features: - Features a low-profile design and a 360° red LED alarm indicator - Has a built-in microcontroller (MCU) for real-time data processing and analysis - Automatic compensation for temperature, humidity, and dust accumulation (drift compensation) along with fault diagnostics - Offers 5 different operating modes, which are configured via a programmer

The DZ-912 is a low-profile mounting base designed for fire detection devices. It provides a stable platform for terminal connections while maintaining a discrete aesthetic. Features: - Applicable to A9030T, A9020T, A9036T, C9030T, and C9021T devices - Features a slim, compact, and low-profile design

The D9057B is an isolator base used to protect the fire alarm system from short-circuit faults. When a short circuit occurs on the loop, the base responds quickly and automatically isolates the damaged section. Once the fault is cleared, the base automatically exits isolation mode and reconnects the previously disconnected part back into the system. The device does not require coding and does not occupy an address in the system loop. Features: - Operates without occupying an address and takes up no space in the system loop - Can be used for an individual device (point isolation) as well as for a group of devices (area isolation) - Equipped with a yellow LED indicator that remains constantly lit during active isolation and turns off during normal operation

The A9060T is an addressable fire alarm manual call point that operates with intelligent two-wire control systems. When pressed after a fire is manually confirmed, the alarm signal and the device address are immediately transmitted to the control panel. Under normal conditions, its red indicator flashes, whereas in an alarm state, it remains continuously lit. Features: - Activated without breaking glass (reusable lever) and reset to its initial state using a special tool - Address configuration is performed electronically via the CODER-9001 programmer - Installed via surface or semi-flush mounting

ZJ-9060 is a specialized mounting base engineered for industrial fire alarm modules. It is made of ABS plastic. Features: - Applicable to and used with the A9060T module - Structurally easy to assemble and install

A9092T is an addressable sounder beacon; it can be used with an addressable fire alarm control panel and is activated when connected to a signal loop. After receiving an alarm signal or command from the panel, the device emits a high-output audible and optical alarm signal to provide evacuation warning. Features: - Equipped with highly efficient LED technology and a specially designed lens - Features a tamper-proof screw hole for protection against unauthorized disassembly - Compatible with both wall and ceiling mount applications - Address configuration is done electronically via a special programmer

DZ-9091K is a red mounting base specifically designed for C9091T and A9092T series sounder strobes (audible and visual alarm devices). It is made of durable ABS plastic. Features: - Compatible and used with C9091T and A9092T sounder strobes - Features a compact, low-profile design

A9093T is an addressable sounder beacon (strobe-siren) that is compatible with addressable fire alarm control panels and is activated when connected to a signal loop. The primary function of the device is to generate audio and optical warning signals in the alarm zone. Features: - It has 7 different tone modes - Simultaneous or independent activation of the sound and light alarm is possible - It has a tamper-evident protection function

A9058T is an addressable I/O (input/output) module used with loop-type fire alarm control panels. It is powered directly by a non-polar 2-wire loop, features low power consumption, and does not require an external 24V power supply connection. The module is installed directly on the DZ-9058 base. Features: - The output contact is a dry contact, without monitoring - The module has 3 programmable working modes: normally open (NO) input signal, normally closed (NC) input signal, and equipment fire alarm and fault input signal (Mode 3) - The address is assigned electronically via a programmer (CODER), with an address range from 1 to 324 - Equipped with status indicators (LEDs) that reflect the status of the input (INPUT ON) and output (OUTPUT ON) signals

DZ-9058 is a specialized mounting base engineered for fire alarm devices. It is made of durable ABS plastic. Features: - Applicable to and used with the A9058T module

A9057T is a loop isolator primarily used to isolate a short-circuited section on the network. After the short circuit problem is resolved, the isolator automatically restores the isolated section and returns it to the overall system. Features: - Isolates the faulty part of the loop in the event of a short circuit - Equipped with a yellow LED status indicator that flashes during polling and illuminates steadily upon activation

DZ-9057 is an ivory mounting base. It is made of ABS material. The DZ-9057 mounting base fits and is used directly with the A9057T model. Features: - Compatible and used with the A9057T model - Made of durable and high-quality ABS plastic

CODER-F100E is a programmer for reading and writing addressable devices (detectors, modules, sounder beacons). It is used for the installation and maintenance of automatic fire alarm systems. The device is used to assign addresses, change working modes, count devices connected to the network, and perform testing. Features: - Can address more than 50,000 points when fully charged - Battery over-discharge protection and automatic shutdown function - Output short circuit protection

HZ911E is a linear optical beam smoke detector. It consists of two main parts: a detector and a reflector. In normal operation mode, the infrared beam emitted by the detector is reflected by the reflector and returns to the receiving tube. When a fire occurs, smoke blocks the infrared beam, resulting in a decrease in the received signal, and the system issues a fire alarm. During an alarm, the detector's red status indicator is constantly lit, and the alarm contact is closed. Features: - The device complies with the GB14003-2005 standard - The protection area is 7 meters on both sides of the beam

C9069L is a two-wire remote indicator. It can be used with both addressable and conventional detectors. When the detector triggers an alarm, the remote indicator lights up. Features: - The device consists of a top and bottom cover - Works with a non-polarity, two-wire connection

SEC3002-2 is a fire alarm panel designed to monitor input signals, provide indications, and activate programmable outputs. It complies with the EN54-2 standard. The system supports 324 addresses on 1 loop, and in the case of 2 loops — 510 addresses. The panel is equipped with a 4.3-inch color LCD screen (with a 480x272 resolution) and a 32-zone indication panel. Features: - Supports 324 addresses for 1 loop or 510 addresses for 2 loops - Equipped with a 4.3-inch color LCD screen (resolution: 480x272) - Features a 32-zone indication and control panel - Stores up to 1000 historical events with date and time stamps

JTY-GS-T8001 is a reflective linear beam smoke detector. The device combines the transmitting and receiving parts into one housing and works in conjunction with a reflector. It features a built-in microprocessor that monitors smoke concentration in real-time and is connected to a compatible fire panel through a four-wire system. The beam detector is equipped with a laser module. The device features an automatic compensation function for dust pollution. Features: - Built-in laser module ensures quick location of the reflector position and easy alignment - Microcontroller processes data in real-time and controls environmental conditions - Features a self-diagnostic function to monitor internal faults - Equipped with LED indicators on the housing for easy control of signal strength

The Secukey SK2-EM+MF is an access controller that combines a touch keypad and an RFID card reader. The device simultaneously supports two different technologies: 125KHz EM and 13.56MHz Mifare cards. Its waterproof housing Complies with the IP66 standard. The device features three operating modes: Standalone, Reader, or central Controller. Features: - User Capacity: The system is designed for 1000 users. - Dual Card Technology: Operates with both EM and Mifare cards. - Access Modes: Supports Card, PIN, and Card + PIN access. - Interlock Function: The device is equipped with an interlock function, allowing two panels to be connected for coordinated and secure management of two doors. - Data Transfer: User information can be transferred to another device via the Wiegand line.