ProsTE პროგრამა Teletek-ის პანელების პროგრამირებისთვის

The A9036T is an addressable multisensor fire detector consisting of an optical smoke sensor and dual thermal (heat) sensors. It simultaneously combines the operating principles of both a photoelectric smoke detector and a heat detector. The device operates on a non-polarity two-wire bus. Features: - Features a low-profile design and a 360° red LED alarm indicator - Has a built-in microcontroller (MCU) for real-time data processing and analysis - Automatic compensation for temperature, humidity, and dust accumulation (drift compensation) along with fault diagnostics - Offers 5 different operating modes, which are configured via a programmer

T-ART/G2+ is a multi-user intercom G2+ two-way audio headset with touch buttons. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic - Duplex audio communication - Secret audio communication and door opening - Connection to the entrance door pushbutton, which saves the use of the doorbell - Different ringing tones depending on the place from where the call was made - Status LEDs: door open, do not disturb, switched on - Volume regulation - Output to auxiliary call repeater - Intercommunication with other units of the house

The A9020T is an addressable point-type heat detector designed to operate with the SEC3002 fire alarm control panel. It collects real-time ambient temperature data, transmits it to the control panel, and accurately executes control commands received from the panel. Features: - Features an automatic temperature compensation mode and a sensor fault detection function for fault reporting to the control panel - Designed with an upper and lower cover and installed on an independent base, making device installation and maintenance convenient - Equipped with a built-in remote indicator output terminal that activates an external indicator light during a fire alarm

ART 4TH/G+ is a multi-user intercom G+ IP system monitor with a 4.3'' color screen and touch buttons, as well as a Handset with a built-in induction loop amplifier, that allows hearing impaired users to activate "T" mode on their hearing aid. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - TCP/IP protocol "G+" digital installation - Monitor with a 4.3" color screen - Case made of white ABS plastic - Handset with built-in induction loop amplifier, that allows hearing-impaired users to activate "T" mode on their hearing aid - Dual operation handset and handsfree communication - Surface mounting - Capacitive navigation buttons - High-efficiency loudspeakers - Audio communications, video, and secret door opening - Video-spy functions, auto-start, doctor mode, and do not disturb - Intercommunication with other units of the house selectively - Personalization of ringtones - Connection to the entrance door pushbutton, which saves the use of the doorbell - Up to 6 monitors in the same house without additional power

The A9030T is an addressable smoke detector designed to operate with the SEC3002 fire alarm control panel. It determines smoke concentration in real-time, transmits the data to the control panel, and executes commands received from it. Features: - Features an automatic compensation function for temperature, humidity, and dust accumulation (drift compensation) along with sensor fault diagnostics - Designed with a two-part housing (upper and lower covers) and an independent mounting base, making device installation and expansion convenient - Equipped with a remote indicator output terminal that activates an external emergency light during an alarm - Provides full electronic coding and address rewriting directly on-site via a programmer

ART 7/G+/48 is a multi-user intercom G+ IP system monitor with a 7'' touch screen. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - TCP/IP protocol "G+" digital installation - Housing made of white ABS plastic - 7" touch screen - Hands-free monitor for surface installation - High efficiency speakers - Possibility to power it locally at 12Vdc, at 18Vdc using D4L-G+/PoE or DCP/G+ and DCS/G+, or at 48V standard PoE - Virtual keyboard for call dialing - Outdoor panel tracking function - Image memory for up to 100 photos (internal storage) - Automatic image deletion function after 30 days - Personalization of background color and ringtones - Monitoring of CCTV cameras with ONVIF protocol (up to 32) - 12Vdc alarm output - 4 zones alarm input: PIR, gas sensor, fire... - Connection via RJ-45 connector

The A9060T is an addressable fire alarm manual call point that operates with intelligent two-wire control systems. When pressed after a fire is manually confirmed, the alarm signal and the device address are immediately transmitted to the control panel. Under normal conditions, its red indicator flashes, whereas in an alarm state, it remains continuously lit. Features: - Activated without breaking glass (reusable lever) and reset to its initial state using a special tool - Address configuration is performed electronically via the CODER-9001 programmer - Installed via surface or semi-flush mounting

The Soul/Access Surface Coded Panel is a multi-user G2+ two-way video call panel equipped with a backlit metal push buttons keypad and a 150º wide-angle camera. Its case is made of Zamak alloy, graphite color, and is anti-vandal. Features: - Made in Spain - Vandal-proof: IK-07 and IP-54 are weatherproof - 150º wide-angle camera with white auto-on LEDs for night vision - LEDs indicating the different states of the system - Backlit metal push buttons with serigraphy of numbers and characters - Secret communication of audio, video, and door-opening process - Acoustic confirmation tones when pressing buttons - Relay output for the activation of two doors - Includes rain shield - Management of up to 128 apartment addresses - External CCTV camera connection terminals - 40 access PIN codes - 8 temporary access PIN codes

A9093T is an addressable sounder beacon (strobe-siren) that is compatible with addressable fire alarm control panels and is activated when connected to a signal loop. The primary function of the device is to generate audio and optical warning signals in the alarm zone. Features: - It has 7 different tone modes - Simultaneous or independent activation of the sound and light alarm is possible - It has a tamper-evident protection function

- Fixation bracket for Soul/access panel. - Made of Zamak alloy, graphite color. - Allows mounting the SOUL/ACCESS panel without the use of the rain shield.

A9092T is an addressable sounder beacon; it can be used with an addressable fire alarm control panel and is activated when connected to a signal loop. After receiving an alarm signal or command from the panel, the device emits a high-output audible and optical alarm signal to provide evacuation warning. Features: - Equipped with highly efficient LED technology and a specially designed lens - Features a tamper-proof screw hole for protection against unauthorized disassembly - Compatible with both wall and ceiling mount applications - Address configuration is done electronically via a special programmer

ART 1/G2+ is a multi-user intercom G2+ system Speakerphone with touch buttons. Features: - Made in Spain - Degree of protection (IP)30 - "G2+" digital installation - Casing manufactured in polished ABS white color - Capacitive touch buttons with acoustic confirmation on press - Duplex audio communication - Privacy on audio and door open progresses - Do not disturb function with light indication - Input for doorbell apartment push button - Different call reception tones depending on where the call is coming from - Volume adjustment - Output to auxiliary call repeater - Intercommunication with other monitors in the same apartment

C9069L is a two-wire remote indicator. It can be used with both addressable and conventional detectors. When the detector triggers an alarm, the remote indicator lights up. Features: - The device consists of a top and bottom cover - Works with a non-polarity, two-wire connection

ART 4 LITE/G2+ is a multi-user intercom "G2+" system monitor with a 4.3'' color screen and touch buttons. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic -Surface mounting - Hands-free monitor with a 4.3" color screen - 4.3" screen with capacitive navigation buttons - High-efficiency loudspeakers - Audio communications, video, and secret door opening - Video-spy functions, auto-start, doctor mode, and do not disturb - Intercommunication with other units of the house selectively - Personalization of ringtones - Connection to the entrance door pushbutton, which saves the use of the doorbell - Output to auxiliary call repeater - Up to 4 monitors in the same house without additional power

A9057T is a loop isolator primarily used to isolate a short-circuited section on the network. After the short circuit problem is resolved, the isolator automatically restores the isolated section and returns it to the overall system. Features: - Isolates the faulty part of the loop in the event of a short circuit - Equipped with a yellow LED status indicator that flashes during polling and illuminates steadily upon activation

ART 7 Lite/G2+ is a multi-user intercom G2+ system monitor with a 7'' color screen. Its graphical interface is distinguished by its simplicity, which makes its functions intuitive and understandable to everyone. Features: - Made in Spain - "G2+" digital installation of 2 non-polarized wires - Case made of white ABS plastic - Surface mounting - Hands-free monitor with a 7" color screen - 7" screen with capacitive navigation buttons - High efficiency loudspeakers. - Audio communications, video, and secret door opening. - Video-spy functions, auto-start, doctor mode and do not disturb. - Intercommunication with other units of the house selectively. - Personalization of ringtones. - Connection to the entrance door pushbutton, which saves the use of the doorbell. - Output to auxiliary call repeater. - Up to 4 monitors in the same house without additional power.

A9058T is an addressable I/O (input/output) module used with loop-type fire alarm control panels. It is powered directly by a non-polar 2-wire loop, features low power consumption, and does not require an external 24V power supply connection. The module is installed directly on the DZ-9058 base. Features: - The output contact is a dry contact, without monitoring - The module has 3 programmable working modes: normally open (NO) input signal, normally closed (NC) input signal, and equipment fire alarm and fault input signal (Mode 3) - The address is assigned electronically via a programmer (CODER), with an address range from 1 to 324 - Equipped with status indicators (LEDs) that reflect the status of the input (INPUT ON) and output (OUTPUT ON) signals

CODER-F100E is a programmer for reading and writing addressable devices (detectors, modules, sounder beacons). It is used for the installation and maintenance of automatic fire alarm systems. The device is used to assign addresses, change working modes, count devices connected to the network, and perform testing. Features: - Can address more than 50,000 points when fully charged - Battery over-discharge protection and automatic shutdown function - Output short circuit protection

The DZ-912 is a low-profile mounting base designed for fire detection devices. It provides a stable platform for terminal connections while maintaining a discrete aesthetic. Features: - Applicable to A9030T, A9020T, A9036T, C9030T, and C9021T devices - Features a slim, compact, and low-profile design

MEET Guard Unit is a 9" resistive touch screen unit made of aluminum profile. Its graphical interface makes the functions intuitive and understandable to everyone. - Aluminum Profile - Resistive Touch Screen Panel - Handset/Hands-Free Audio Communication - 9" Colour TFT Screen - Sip P2p Protocol - Low Power Consumption - Audible and Visual Alarm Notifications - RTSP IP Camera Compatible - Audio Conversation Records - Android Modular Structure - High Capacity CPU - Available In 10 Languages

DZ-9057 is an ivory mounting base. It is made of ABS material. The DZ-9057 mounting base fits and is used directly with the A9057T model. Features: - Compatible and used with the A9057T model - Made of durable and high-quality ABS plastic

WIT is a capacitive touchscreen monitor available in 7” and 10” versions. WIT's graphical interface provides an intuitive user experience since it is designed to focus on residential intercom use. FEATURES: - Capacitive Touch Screen (7” / 10”) - Hands-Free Audio Communication - High-definition color TFT - Different ringtones depending on the call source - 3 Different color options (white, black, gold) - Remote firmware upgrade - Android-based - Available in 8 languages (English, Spanish, German, Polish, Russian, Hebrew, Turkish, and Chinese) - Doorbell connection with IP camera visualization - IP CCTV visualization (up to 8) - Aux IP CCTV camera visualization and aux relay operation during a call (up to 4) - Relay activation (up to 8 using relay module) - Home Automation Ready through Apps (in 7” and 10”) - Automatic and Manual Picture Capture - Integrated 7 zones alarm + tamper

DZ-9058 is a specialized mounting base engineered for fire alarm devices. It is made of durable ABS plastic. Features: - Applicable to and used with the A9058T module