SensoMAG R20 is a conventional temperature detector with a digital processing algorithm. The detector reacts both to a rapid rise in temperature and to temperatures above 58°C. The SensoMAG R20 can be used in any conventional fire alarm system with fire alarm thresholds of 10mA to 15mA. Features: - Reacts to a rapid rise in temperature and also to temperatures above 58°C - Digital processing algorithm - Thin and simple design - LED indicator with 360° visibility - Status indication every 8 seconds - Certified by EN54-5 standard

MAG8 is a conventional fire alarm panel certificated to EN54-2/4, providing 8 fixed zones. Up to 20 (32 SensoMAG Series) fire detectors can be connected to every fire zone. An unlimited number of call points can be connected to every of the fire zones. MAG8 is situated in a plastic box. The panel is easy for installation and maintenance and provides user-friendly daily operation. The panel is suitable for residential, small, and middle office applications with 8 protected areas up to 3000m². The panel is available in different language versions for the front panel. Features: - 8 fully monitored fire zones with up to 32 fire alarm detectors and unlimited number of call points per zone - 2 monitored siren outputs – 24V/ 0.5A each - 1 “fire” and 1 “fault” relay output - Double knock - Siren delay - Supports relay expander and LOG module - Active EOL allowing continuous monitoring of inputs - “One man” zone testing - Multilanguage support - LED indication - Security key - Plastic box

SensoMAG B12L/U is an alarm base (12V) with relay output. The base has two operation modes: Latch and Unlatch. The base is designed for conventional detectors SensoMAG series: F10, F10B, R20, S30, and M40 for applications in security alarm systems. The base is with low profile design and a reliable contact system. It is possible to lock the detector to the base for extra security. Features: - 12V - Application in intruder alarm systems - Latched/Unlatched mode

SensoIRIS M140 is an addressable combined (temperature and smoke) detector designed for early fire detection. The detector works with panels that support the TTE communication protocol. The detector is compatible with the fire base B124. Features: - Certified by EN54-5, EN54-7 and EN54-17 standard - sensitivity adjustment from the panel - Day/night mode - Thin and simple design - LED indicator with 360° visibility - Status indication

SensoIRIS B124 is a standard base for addressable detectors and sounders SensoIRIS Series. Features: - Low profile design - Reliable contact system - Possibility of locking the detector to the base - BOSEC certified

SensoMAG MCP150 is a fire alarm button with a built-in isolator module. The button is intended for addressable fire systems operating on the TTE protocol. The alarm button is activated by a finger press and sends a signal to the control panel to trigger an alarm for further response. Features: - Certified by EN54-11, EN54-17 and LPCB standard - Surface mounting - Reloadable construction - LED indicator - Includes a tool to reset the button - it is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - IP40 protection - Built-in isolator module

SensoIRIS S130 is аn addressable optical-smoke detector designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 is compatible with firebase B124 Features: - Sensitivity adjustment from the panel - Thin and simple design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

The SIMPO panel is intended for small and medium-sized objects, for installing an address system. The address panel supports expansion up to 2 circuits, and 250 devices can be connected to 1 circuit. It is also possible to divide into 48 zones. System malfunctions are visualized on the LCD screen and LED lights. Up to 64 Simpo panels can be interconnected via RS485 redundant or network LAN modules. The panel is programmed both directly with the panel buttons and through the ProsTE program. Features: - Certified by EN54 – 2/4 standard - 2 circuits, max. 250 addressing devices - Ability to connect a thermal printer - 3 modes of programming detectors: 1) auto-addressing, 2) self-addressing, 3) addressing with a programmer - 3 levels of users - Monitor, program and control with Observer - Description of Georgian-language indicators on the panel - The panel is placed in a metal box

SensoMAG MCP50 is a manual call point designed to work in conventional fire alarm systems. The call point has a resettable fragile working element, that sends an alarm signal to the fire alarm panel when triggered by a push in the indicated spot. The LED indication informs the user of fire and test events. Features: - Surface mounting - Resettable flexible element - LED indication - Special tool for resetting after alarm event - It is possible to attach a protective cap to the button (need to purchase separately, code - 40202191) - EN54 – 11 certified - Rate of protection IP 40

MAG2P is a conventional fire alarm panel certified to EN54-2/4 standard, providing 2 fixed zones. Up to 20 (32 SensoMAG Series) fire detectors can be connected to every fire zone. An unlimited number of call points can be connected to each of the fire zones. MAG2P is situated in a plastic box. The panel is easy for installation and maintenance and provides user-friendly daily operation. The panel is suitable for residential, small, and middle office applications with protected areas up to 1000m². Features: - Certified by EN54-2/4 standard - 2 fully monitored zones - Ability to connect 32 fire detectors and an unlimited number of alarm buttons - 2 monitoring outputs for sirens - 300mA each - 2 relays with NO/NC contacts. Relay 1 will close in case of alarm, relay 2 in case of fault - Circuit termination modules ensure constant monitoring of zones - Zones can be tested easily even by one person - Multilingual front panel - LED indication - Ability to restrict access to functions through a key - Plastic box

SensoIRIS MIO40 is an addressable module with 4 inputs. Designed for addressable fire protection systems working on the TTE communication protocol. SensoIRIS MIO40 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 entrances - Feeding from the circuit - Integrated insulator - Certified EN54-18, EN54-17:2005

SensoIRIS S130 IS is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS MC-Z is an addressable conventional zone module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors the state of the connected conventional fire line and reports its status to the control panel. SensoIRIS MC-Z is powered on from the fire panel and can be controlled via the communication protocol. Features: - Max number of detectors in one zone – 32 - Built-in isolator - Placed in a plastic box with a transparent cover for easy inspection

Fireray Long Range Kit 1010-000 is an accessory that increases the operating range of 6010-100 Fireray One from 50m to 120m.

Fireray One is a stand-alone beam detector, its priority is ease of installation. Features: - Integrated user interface - Alignment mode switch, alignment direction buttons and duration switches for alarm response threshold - Alignment status indicator - 2 green LEDs and 1 yellow LED - Green LED flashes every 10 seconds during stability - The red LED flashes every 10 seconds during a fault - Yellow LED flashes every 10 seconds for contamination or every 5 seconds for contamination

FIRETEXT2 is a certified stand-alone smoke and carbon dioxide alarm GSM detector that sends a message in the form of SMS. Features: - Integrated GSM module - Battery 9V lithium 1200 mAh ANSI/NEDA 1604LC - Test button - LED indicator

MAGEOL impedance, end-of-line zone modulus.

FRL-1 is a fire remote indicator with 1 input. The device repeats the status of 1 or several automatic fire detectors (up to 3) SensoMAG or SensoIRIS series. The remote indicator operates with limited current detectors. Features: - Allows maximum visibility - Suitable for surface mounting

IRIS printer is a thermal printer designed for IRIS PRO addressable fire alarm panels. The printer has a modular design to integrate with the IRIS PRO and IRIS PS72 power supply module. The IRIS printer is used to print the list of events and is equipped with an independent power supply. Features: - Thermal printer in a metal box - Modular construction - Autotest and status indicator - Printing precision - 8 dots/mm, 576 dots/line - Printing speed - max 170mm/sec - 2 types of font support - 12×24 dots and 9h17 dots

SensoIRIS MIO22 is an addressable input-output module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors 2 analogue input signals and controls 2 relay outputs. SensoIRIS MIO22 is powered on from the fire panel and can be controlled via the communication protocol. Features: - 2 Inputs - 2 Outputs - Loop powered - Built-in isolator - Placed in plastic box with transparent cover for easy inspection - EN54-18, EN54-17 certified

SensoIRIS MIO04 is an addressable module with 4 outputs. It is intended for addressable fire protection systems working on the TTE communication protocol. The SensoIRIS MIO04 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 speakers - Feeding from the circuit - Integrated isolator - Certified EN54-18, EN54-17:2005

CallPoint Cover Set of 5 pcs. plastic safety covers for manual call points. Features: - Compatible with SensoMAG MCP50 and SensoIRIS MCP150

IRIS TTE loop is a loop expander for 1 loop in IRIS Addressable Fire Alarm Systems. The loop expander supports TTE communication protocol and is designed to operate with SensoIRIS detectors, modules, and sirens.

SensoIRIS Programmer is a programming tool for assigning addresses of SensoIRIS devices (detectors, modules, call points, and sounders), supporting communication protocol TTE. The programmer is designed for reading and writing addresses and setting parameters to SensoIRIS series addressable detectors and modules. Features: - Built in SensoIRIS B124 standard base - Mobility in operation - Multilingual support - Optional battery power supply 4×1,5V (not included) - The kit includes: cables for programming SensoIRIS modules; AC-DC adapter