SensoIRIS WSB IP65 is a waterproof protected deep base specially designed for outdoor installations of addressable sounders SensoIRIS series. The deep base is suitable for wall mounting in applications in aggressive environments requiring IP65 protection of the devices. SensoIRIS B124 standard base is mounted with screws. Features: - Certified by EN 60529 standard - Protection IP65 - Surface mounting - wire max. Cross section 3 mm - Compatible with SensoIRIS series directional sirens

SensoIRIS Programmer is a programming tool for assigning addresses of SensoIRIS devices (detectors, modules, call points, and sounders), supporting communication protocol TTE. The programmer is designed for reading and writing addresses and setting parameters to SensoIRIS series addressable detectors and modules.

IRIS TTE loop is a loop expander for 1 loop in IRIS Addressable Fire Alarm Systems. The loop expander supports TTE communication protocol and is designed to operate with SensoIRIS detectors, modules, and sirens.

Set of 5 pcs. plastic safety covers for manual call points.

SensoIRIS MIO04 is an addressable module with 4 outputs. It is intended for addressable fire protection systems working on the TTE communication protocol. The SensoIRIS MIO04 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 speakers - Feeding from the circuit - Integrated isolator - Certified EN54-18, EN54-17:2005

SensoIRIS MIO40 is an addressable module with 4 inputs. Designed for addressable fire protection systems working on the TTE communication protocol. SensoIRIS MIO40 is powered from a fire panel and can be controlled via a communication protocol. The module is housed in a plastic box with a transparent lid for visual inspection. Features: - 4 entrances - Feeding from the circuit - Integrated insulator - Certified EN54-18, EN54-17:2005

IRIS printer is a thermal printer designed for IRIS PRO addressable fire alarm panels. The printer has a modular design to integrate with the IRIS PRO and IRIS PS72 power supply module. The IRIS printer is used to print the list of events and is equipped with an independent power supply. Features: - Thermal printer in a metal box - Modular construction - Autotest and status indicator - Printing precision - 8 dots/mm, 576 dots/line - Printing speed - max 170mm/sec - 2 types of font support - 12×24 dots and 9h17 dots

FRL-1 is a fire remote indicator with 1 input. The device repeats the status of 1 or several automatic fire detectors (up to 3) SensoMAG or SensoIRIS series. The remote indicator operates with limited current detectors.

MAGEOL impedance, end-of-line zone modulus.

FIRETEXT2 is a certified stand-alone smoke and carbon dioxide alarm GSM detector that sends a message in the form of SMS. Features: - Integrated GSM module - Battery 9V lithium 1200 mAh ANSI/NEDA 1604LC - Test button - LED indicator

Fireray One is a stand-alone beam detector, its priority is ease of installation. Features: - Integrated user interface - Alignment mode switch, alignment direction buttons and duration switches for alarm response threshold - Alignment status indicator - 2 green LEDs and 1 yellow LED - Green LED flashes every 10 seconds during stability - The red LED flashes every 10 seconds during a fault - Yellow LED flashes every 10 seconds for contamination or every 5 seconds for contamination

Fireray Long Range Kit 1010-000 is an accessory that increases the operating range of 6010-100 Fireray One from 50m to 120m.

SensoIRIS MC-Z is an addressable conventional zone module, designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module monitors the state of the connected conventional fire line and reports its status to the control panel. SensoIRIS MC-Z is powered on from the fire panel and can be controlled via the communication protocol. Features: - Max number of detectors in one zone – 32 - Built-in isolator - Placed in a plastic box with a transparent cover for easy inspection

SensoIRIS S130 IS is аn addressable optical-smoke detector with a built-in isolator designed for installation in addressable fire alarm systems supporting TTE communication protocol. The detector is powered on from the panel and can be controlled via the communication protocol. The detector SensoIRIS S130 IS is compatible with fire base B124. - Sensitivity level selectable from the control panel – High/Normal/Middle/Low - Low-profile design - Led indication with 360° visibility - Built-in isolator - EN54-7 and EN54-17 certified

SensoIRIS GAS is an addressable gas, LPG and CH4 (methane) leak detector. The gas detector has an automatic diagnostic function, it constantly checks the status of the sensor and electronics. SensoIRIS GAS is equipped with a button with the following functions: - Short press activates "SILENCING" mode, green LED flashes, buzzer and panel activation are disabled for 5 minutes. - If pressed for longer than 5 seconds, the "TEST" mode is activated, in this case the green, red and yellow LEDs are activated. The panel and buzzer are also activated. After 6 seconds, the gas detector emits 2 short beeps and turns off the "TEST" mode.

IRIS PS72 is a power supply unit designed for backup power supply of IRIS PRO addressable fire alarm panel. Features: - The power supply unit is intended for internal use only - Certified according to EN54-4 standard - Protection IP30

SensoIRIS MOUT-240 is an electrical main switching relay output control module designed for application in addressable fire alarm systems, supporting TTE communication protocol. The module provides an interface for 240V and it is suitable for the control of 240VAC voltage circuits. - SensoIRIS MOUT-240 is powered on from the fire panel and can be controlled via the communication protocol - The module is mounted in a separate small plastic box suitable for wall mounting, with a transparent cover for visual inspection

SensoIRIS MOUT is an addressable monitored output module for connecting conventional sounders. The module is designed for application in addressable fire alarm systems, supporting TTE communication protocol. SensoIRIS MOUT has a built-in isolator. - The module monitors and transfers to the control panel the status of the output – short circuit, interruption, or missing power supply in the circuit - SensoIRIS MOUT is powered on from the fire panel and can be controlled via the communication protocol - The module is mounted in a separate small plastic box suitable for wall mounting

Aerosol Testgas is a pure synthetic aerosol that supplies the detector with particles found in real smoke to test the device. - Compliant with EU regulations - UL certified

SF 300 is an outdoor conventional piezo siren. It has a flat plastic cover, suitable for logo stickers with dimensions up to 220x160mm. The siren is equipped with 2 LED flash indicators. Feature: - LED strobe - IP44 protection for electronics -Flat cover for logo sticker - EN 54 – 3 Certified - Two piezo sounders

SensoIRIS WS is аn addressable Wall Mount Sounder and Strobe, designed for installation in addressable fire alarm systems supporting TTE communication protocol. Features: - Certified by EN54-3 standard - Sound selection - LOW (80-88dB)* and HIGH (92-98dB)* - Ability to select 32 types of sound from the panel - Piezo sounder - Loop synchronization - Transparent plasma

SensoIRIS WSST EN54-23 is аn addressable VAD (Visual Alarm Device) Wall Mount Sounder and Strobe, designed for installing in addressable fire alarm systems supporting TTE communication protocol. The device is powered on from the panel and can be controlled via the communication protocol. SensoIRIS WSST EN54-23 is compatible with fire bases B124 for ceiling or wall mounting and WSB IP65 for wall mounting. SensoIRIS WSST EN54-23 is certified according to EN54-3 and EN54-23! Feature: - Selectable sound level – LOW (80-86dB)* and HIGH (92-97dB)* - 32 sound types selectable from the panel - Piezo sounder - White LED flash - Loop synchronization - Transparent plastic case - EN54 – 23/3 certificated

IRIS TTE loop is a loop expander for 1 loop in IRIS 8 Addressable Fire Alarm Systems. The loop expander supports TTE communication protocol and is designed to operate with SensoIRIS detectors, modules, and sirens. Feature: - Communication Protocol: TTE (Teletek Electronics) - Maximum number of devices: up to 250 - Maximum consumption of the loop devices: 0.5A

The loop tester is a diagnostic device for cable test prior to detectors installation, for loop continuity test after devices installation, and for auto-addressing. Features: - Power supply unit from 220V AC network and adapter included - Circuit or line testing - Loop Short/Loop Break localization for both addressable and non-addressable circuits - Easy navigation with only 4 buttons and an on/off switch